ESSENTIAL READING
VIEW ALLCuring Oven Basics
Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...
Read MoreConveyors and Paint Systems
Choosing the right conveyor system, coating technology, and ancillary equipment.
Read MoreZinc Phosphate: Questions and Answers
Our experts share specific questions about zinc phosphate and pretreatment
Read MoreWhen to Introduce Automation Into Your Finishing System
Looking to increase productivity for your liquid coating operation? John Owed of Carlisle Fluid Technologies provides examples of how automation can help improve quality and efficiency for paint spray equipment.
Read MoreHow to Avoid Mud Cracking
Julie Holmquist of Cortec Corporation discusses ways to avoid mud cracking defects when applying anticorrosion coatings.
Read MorePretreatment for Painting
Better adhesion, enhanced corrosion and blister resistance, and reduced coating-part interactions make pretreatment a must.
Read MoreLatest Liquid Coating News And Updates
CO2-Reducing Pretreatment Solutions and Zinc Flake Coatings
The pretreatment process includes a low-temperature, long life cleaner, near neutral pH descale, zirconium pretreatment and ambient temperature adhesion promoter.
Read MoreSpray Tech Industrial Solutions Merges with PBS Industries
The merger combines expertise in cutting-edge spray coating technologies with that in industrial ventilation equipment solutions.
Read MoreSherwin-Williams releases printed metal coil coatings collection
New Sherwin-Williams coil coatings collection aims to bring an enhanced look of natural building materials for architectural applications.
Read MoreChoosing Paint for Fast-Paced, Extra Slip, High Temp Applications
Many industrial applications require coatings that not only offer corrosion resistance and aesthetics, but provide additional attributes such as heat resistance and quick drying properties. This helpful clinic offers a few examples.
Read MoreAdvantages of UV-LED Spot Curing for Collision Repair
Carlisle Fluid Technologies’ Jacob Fortmeyer shares advantages, considerations and important equipment features for the UV-LED curing process.
Read MoreChanging From Liquid to Powder Coating
Will the powder coating perform better than your liquid system? Products Finishing columnist Rodger Talbert discusses considerations you should consider when making the switch.
Read MoreFeatured Posts
Optimizing Your Liquid Electrostatic System
For your electrostatic process to work consistently, there are three primary items to check: voltage at the applicator, part grounding, and compatibility of the coating material. John Owed of Carlisle Fluid Technologies walks you through the process.
Read MorePrecise Paint Flow Reduces Material and Labor Costs
Finding a more accurate paint proportioner for its application enabled this auto parts manufacturer to save significant costs and labor while increasing capacity.
WatchThe Best Method for Coating Full-Size Aircraft
John Owed from Carlisle Fluid Technologies analyzes the difference between using air-assisted airless, air spray and other technologies for coating a full-size aircraft. Which is better?
Read MoreConcrete Reinforced Bars Built to Last
Not all corrosion-resistant materials for infrastructure are created equally. Epoxy-coated steel rebar has advantages that other materials used to prevent corrosion do not.
Read MoreCuring Oven Basics
Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...
Read MoreFinishing Systems Provider Celebrates 150 Years, Looks to Future
From humble beginnings as an Indiana-based tin shop, Koch Finishing Systems has evolved into one of the most trusted finishing equipment providers in the industry.
Read MoreFAQ: Liquid Coating
What is liquid coating?
There are four basic ingredient classes found in all liquid coatings: binders, pigments, carriers and additives. In combination, these components create a liquid technology that dries to a film, providing protection and aesthetics. Each of these four components is integral to the coating composition.
What liquid coating is best for my operation?
An understanding of the composition and curing process of coatings provides insight for making a coating selection, helping finishers match the product to their performance, regulation and application requirements. The first decision in coating selection is often about the general type of technology preferred: solvent-borne, high-solids and waterborne.
https://www.pfonline.com/articles/choosing-the-right-liquid-coating-application
What is the best way to adjust viscosity in my paint?
Most coaters don’t think about the fact that adding solvent to reduce the viscosity of their coating is fundamentally changing the formulation of their paint.
Instead, we might try:
- Create a staging area to get the paint to the right temperature before we bring it to the line
- Develop summer/winter blends
- Install paint heaters
https://www.pfonline.com/articles/adjusting-viscosity-in-liquid-coatings
How can I minimize leakage during coating?
Here are some recommendations for avoiding plug loss, leakage and rework.
- Use the correct plug size
- Use the correct plug type
- Pay attention to the plug’s lifespan
- Use custom solutions
https://www.pfonline.com/articles/how-to-minimize-plug-loss-and-leakage-during-coating
Liquid Coating Supplier Categories
- Conveyors, Flat Pallet
- Power Supplies for Electrostatic Processes
- Flame Spray-Coating Materials, Plastic
- Current Controls
- Testing Equipment, Air-Motion
- Fluxes, Tinning & Soldering
- Robot Applicator Cleaner
- Solar-Collector Coatings
- Pipe & Fittings, Chemical Resistant
- Conveyor Loading/Unloading Equipment, Automatic
- Conveyors, Inverted Power-and-Free
- Testing Equipment, Thermal Cycling
- Thermometers, Pyrometers
- Testing Equipment, Abrasion Resistance
- Coatings, Conformal
- Shop Management Software & Systems
- Pigments, Pearlescent
- Analytical Equipment, Atomic Absorption, Spectrophotometric
- Environmental Test Chambers
- Humidity Cabinets
- Pigments, Metallic
- Programmable Controllers
- Conveyors, Overhead Traveling Hoist
- Spectrophotometers
- Conveyor Belts
- Conveyors, Belt
- Drum-Handling Equipment, Accessories
- Drum Liners, Rubber, Plastic
- Testing Equipment, High-Voltage Electrostatic
- Panels, Paint & Plating Testing
- Coatings, Electrocoatings
- Controls, Temperature
- Analytical Equipment, X-ray Fluorescence
- Racks, Plating, Painting & Anodizing
- Software for Finishing
- Testing Laboratories, Independent, Paint Finishing
- Painting Testing Equipment
- Screen-Printing Equipment & Supplies
- Analytical Equipment, Photometric
- Robots, Painting & Powder Coating
- Controls, Air Pressure
- Hoists, Traveling: Automatically Controlled
- Gloves, Work
- Air Make-Up Systems
- Spray Booth Coatings
- Chillers
- Viscosity Control Systems, Automatic
- Rack Trucks
- Controls, Burner
- Testing Equipment, Paint Film Discontinuity
- Conveyor Cleaning Equipment
- Drum Pumps
- Controls, Color
- Computer Software for Finishers
- Furnaces, Porcelain Enameling
- Painting Equipment, Personnel Carriers
- Blowers, Air (for Push-Pull Ventilation)
- Pearlescent Finishes
- Testing Equipment, Impact Resistance
- Painting Equipment
- Masking Resins, UV Curable
- Burners, Gas
- Resins, Paint & Powder Coating
- Equipment Engineering & Installation Services
- Spray-Gun Controls, Memory
- Burners, Oil
- Temperature Recorders
- Flock-Finishing Equipment
- Conveyors, Overhead Chain
- Testing Equipment, Electrochemical Corrosion
- Hoods, Masks & Breathing Systems
- Testing Equipment, Adhesion
- Ovens, High-Velocity
- Rheostats & Switches
- Flooring, Chemical-Resistant
- Spray Booths, Paint & Powder Coating
- Pipe-Line Strainers
- Conveyors, Magnetic Belt
- Part Recognition
- Inks, Metal Color-Coding
- Current-Density Meters
- Conveyor Lubricators
- Controls, Fluid Pressure
- Drum Warmers
- Magnets, Tank
- Testing Equipment, Color
- Testing Equipment, Thickness of Coating
- Computer Control Systems for Finishing Processes
- Waxes
- Testing Equipment, Salt Spray
- Ovens, Infrared
- Testing Equipment, Accelerated Weathering
- Used Equipment
- Safety Equipment & Materials, Personal
- Tanks, Chemical Shipping
- Testing Equipment, Gloss
- Finishing Systems, Paint, Porcelain Enamel, Powder, Conveyorized
- Clothing for Paint Finishers
- Inks, Metal Decorating
- Oven-Temperature Monitors/Curing Analyzers
- Protective Films
- Spray Booth Cleaning Materials
- Hoists, Traveling: Manually Controlled
- Thinners, Lacquer and/or Paint
- Conveyors, Overhead Power-and-Free
- Testing Equipment, Paint Film Flexibility
- Air-Sampling Equipment (In-Plant Environment)
- Electrolytic Lacquer
- Ovens, Convection
- Metalizing Sprays & Conductive Paints
- Flame Spray-Coating Materials, Metal
- Masking, Customized
- Plastisol Coating Materials
- Conveyors, Chain-on-Edge Spindle-type
- Noise-Control Enclosures, Devices
- Testing Service, Accelerated Weathering
- Testing Equipment, Rectifier Ripple
- Temperature Indicators
- Spray-Gun Movers, Paint or Powder Coating
- Spray Metallizing (Silver Spray) Supplies
- Testing Equipment, Slip & Friction
- Spray Booth Lighting Fixtures
- Hoses, Air or Liquid
- Tape, Masking for Plating & Painting
- Burners, Gas & Oil (Combination)
- Chemical Coatings
- Conveyors, Wicket
- Consultants, Independent, Organic Finishing
- Coatings, Ceramic, Refractory
- Lamps, Color Matching
- Infrared Heaters, Gas
- Paint Training Equipment
- Associations, Tradeshows & Professional Groups
- Conveyor Hangers, Rotating
- Racking/Unracking Machines
- Stop-Off Coatings, Waxes