leadership
Episode 49: An Interview with Darren Williams, Professor of Chemistry
PF Senior Editor Lori Beckman interviews Parts Cleaning Conference co-chair, Darren Williams. They discuss highlights from the 2024 conference, industrial parts cleaning trends and current regulations.
Read MorePlasma Electrolytic Oxidation (PEO): A High-Performance Coating for Light Metal Alloys
Plasma Electrolytic Oxidation (PEO) offers an innovative approach to high-performance coatings for light metal alloys, providing superior alternatives to traditional hard anodizing. The process transforms the surface of metals like Al, Mg and Ti into a robust oxide layer with customizable properties, tailored for demanding applications in aerospace, semiconductor, and industrial manufacturing.
Read MoreTackling Common Cleaning Challenges
These four cleaning problems have practical solutions that, when followed properly, can be successful.
Read MoreControl Panel to be Displayed at Pack Expo International 2024
Paxton Products introduced the Control Panel and will display it at Pack Expo International 2024.
Read MorePolarization and Natural Order - The 56th William Blum Lecture
This paper provides an overview of the parallels between the synthetic order established by non-equilibrium reactions, such as anodizing, which are nano-scale, and the natural order established by equilibrium reactions in nature, many of which are on the macro-scale.
Read MoreAESF Heritage: SUR/FIN 2000 – European Academy of Surface Technology Throwing Power Measurement: The Assaf Cell
A throwing power cell is described in detail, which can be used as a small jig and positioned in an electroplating tank. This Assaf Cell is particularly useful for simulating small recesses, typically through-holes found in printed circuit boards.
Read More
Coated Titanium Anodes for Trivalent Chrome
MMO-coated anodes, being insoluble and dimensionally stable, ensure a consistent surface finish for years of use, even in complex geometries or recessed areas.
Read MoreMaximize Your Racking Efficiency and Quality
Best practices for racking parts in surface finishing operations.
Read MoreScheduling Mode Saves Time
Cetec ERP enhances scheduling with its Per Piece Scheduling Mode that saves time and advances individual pieces through production.
Read MoreOne-Step Metal Surface Preparation, Pretreatment
International Chemical Products aims to reduce the amount of time and money finishers spend on surface prep and pretreatment by delivering a one-step solution, Picklex 20.
Read MorePaint Atomizer Reduces Paint Waste
ABB launches the RB 1000i-S paint atomizer for efficient and sustainable paint shops. The paint atomizer increases transfer efficiency by up to 10%.
Read MoreIndustrial Spray System Drives High Production Rates
Coval Technologies introduces the Coval SP-HV industrial sprayer. The sprayer uses a separate air compressor to drive the pump, ensuring high efficiency and reliability.
Read More
NAR Appoints US Sales Manager
North American Rectifiers (NAR) announces the addition of Mark Thede as its U.S. sales manager based in Arizona, U.S.
Read MoreA Curious Mind Rises to the Top
Read Matt Kirchner’s perspective about why curiosity, on the part of those leading change and innovation, is such a sought-after trait.
Read MorePlating Top Shop Values Benchmarking Survey
This 2024 Top Shop uses the survey as motivation to reach its goal and stay consistent.
Read MoreHow to Address Declining Powder Coating Coverage Over Time
Fine particles from reclaim could be to blame for powder coating problems that emerge over time. Avoid problems by keeping hooks clean, maintaining guns and using reclaim powder quickly to avoid accumulation of fines.
Read MoreSurface Finisher Adds Thermal Spray Facility to Stay ‘Hot’
Continuing to grow its capabilities, this finishing company, which operates a 14-building campus, adds yet another service to its already long list of offerings.
Read MoreGema USA Announces Sales Manager Promotion
Gema USA Inc. announces the promotion of Shawn Hayes to Sales Manager. Hayes will oversee the sales team, managing the U.S. and Canadian markets.
Read More
Chemical Company Awarded for Automotive Coating Concept
The monocoat simplifies the paint line of automobiles and the low temperature curing technology reduces energy consumption during manufacturing.
Read MoreDeGeest Corp., Lesta USA Expand Offerings
DeGeest Corp., Lesta, Eurosider combine forces to help manufacturers close the gap on automation.
Read MoreHeadquarters Relocates for Growth and Sustainability
Gema's headquarters moves to Gossau, Switzerland, to boost production capacity and sustainability efforts with upgraded testing labs and modern infrastructure.
Read MoreAkzoNobel Brings Catalan Style to Aerospace Coatings
At MRO Europe in Barcelona, AkzoNobel showcases a Catalan-style aircraft panel with 13 colors, demonstrating their basecoat/clearcoat system in a vibrant design.
Read MoreUnderstanding Shot Peening
A look inside shot peening — a process of “hammering” of work pieces with precisely defined blast media.
Read MoreCeramic Media Filters Out Metals for Less
As a low-cost alternative to legacy technologies, this ceramic molecular media filtration system removes metals and pollutants from industrial wastewaters at a low price point.
Read More
