nasf
Plasma Electrolytic Oxidation (PEO): A High-Performance Coating for Light Metal Alloys
Plasma Electrolytic Oxidation (PEO) offers an innovative approach to high-performance coatings for light metal alloys, providing superior alternatives to traditional hard anodizing. The process transforms the surface of metals like Al, Mg and Ti into a robust oxide layer with customizable properties, tailored for demanding applications in aerospace, semiconductor, and industrial manufacturing.
AESF Heritage: The 2002 Hydrogen Embrittlement Seminar No. 4: Hydrogen Embrittlement – A Personal View
This is last of four papers presented during AESF Week 2002 at the Rosen Center in Orlando, Florida on January 30, 2002, as part of the Hydrogen Embrittlement Seminar. This paper presents a comprehensive overview of the research into hydrogen embrittlement at the turn of the century. The full paper on this work can be accessed and printed at short.pfonline.com/NASF24Sep4.
Read MoreAESF Heritage: The 2002 Hydrogen Embrittlement Seminar: 3. Hydrogen Management – Averting a Crisis
This is third of four papers presented during AESF Week 2002 at the Rosen Center in Orlando, Florida on January 30, 2002, as part of the Hydrogen Embrittlement Seminar. This paper covers operational, management and recordkeeping issues related to hydrogen embrittlement. The full paper on this work can be accessed and printed at short.pfonline.com/NASF24Sep3.
Read MoreNASF Foundation Research Project #123: Electrochemical Manufacturing for Energy Applications - 10th Quarterly Report
The NASF-AESF Foundation Research Board selected a project on electrodeposition toward developing low-cost and scalable manufacturing processes for hydrogen fuel cells and electrolysis cells for clean transportation and distributed power applications. In this period, we followed our work on 3D printing anode support for solid oxide fuel cells, focusing on the thermal shock properties of 3D printed yttria-stabilized zirconia (YSZ).
Read MoreAESF Heritage: The 2002 Hydrogen Embrittlement Seminar No. 2: Practical Prevention of Hydrogen Embrittlement on a Plating Line
This is second of four papers presented during AESF Week 2002 at the Rosen Center in Orlando, Florida, on Jan. 30, 2002, as part of the Hydrogen Embrittlement Seminar. A practical overview of dealing with hydrogen embrittlement on the plating line. The full paper of this work can be accessed and printed at short.pfonline.com/NASF24Sep2.
Read MoreBonus Podcast: Paul Skelton, NASF Palmetto Southeast Chapter
An overview of the NASF Palmetto Southeast Chapter 16th Annual Fall Conference — Oct. 9-10, 2024 at Folly Beach, S.C.
Read MoreAESF Heritage: The 2002 Hydrogen Embrittlement Seminar No. 1: Hydrogen Embrittlement
This is first of four papers presented during AESF Week 2002 at the Rosen Center in Orlando, Florida, on Jan. 30, 2002, as part of the Hydrogen Embrittlement Seminar. A detailed overview of hydrogen embrittlement beginning with elemental discussions of the scientific phenomenon, occurrence, metallurgical attributes, habits of various metals and alloys and basic solid-state physics.
Read MorePolarization and Natural Order - The 56th William Blum Lecture
This paper provides an overview of the parallels between the synthetic order established by non-equilibrium reactions, such as anodizing, which are nano-scale, and the natural order established by equilibrium reactions in nature, many of which are on the macro-scale.
Episode 47: An Interview With Vince Noonan, President, NASF Foundation
In this installment of On the Line, PF speaks with Vince Noonan, president of the NASF Foundation about the recent NASF rebranding and changes to its educational initiatives.
Read MoreFinishing Industry to Gather for Washington Forum 2024
Finishing professionals from across the nation to convene in Washington D.C. to discuss policy at the NASF 2024 Washington Forum Sept. 16-18.
Read MoreNASF/AESF Foundation Research Project #122: Electrochemical Approaches to Treatment of PFAS in Plating Wastewater - 12th Quarterly Report
This NASF-AESF Foundation research project report covers the 12th quarter of project work (October – December 2023) at the University of Georgia. In our previous report, we described our work on performance and effect of surface fluorinated Ti4O7 anodes on PFAS degradation in reactive electrochemical membrane (REM) mode. This quarter, our experiments involved utilizing porous Ti4O7 plates serving both as anodes and membranes. Tests compared pristine and F-18.6 Ti4O7 anodes at current densities of 10 mA/cm2 and 40 mA/cm2. This 12th quarterly report discusses the mechanisms of the effects on EO performance by anode surface fluorination.
Read MoreElectroplating in the Context of Worldwide Nanotechnology Initiatives: A Heritage Paper
In the first part, a summary is presented on recently established nanotechnology initiatives in various countries around the world. Program funding levels and core activities will be compared to provide a basis for assessing business opportunities for various industries. The second part of the paper looks at specific examples of nanostructures made by electrochemical methods currently at various stages in their development, or already in use.
Read MoreNASF/AESF Foundation Research Project #120: Electrochemical Destruction of Perfluorooctanesulfonate in Electroplating Wastewaters – January – December 2023
This NASF-AESF Foundation research project report covers quarterly reporting for the year 2023 at the University of Illinois at Chicago. The objective of this work is to utilize a cost-effective reactive electrochemical membrane (REM) for the removal of PFAS from synthetic electroplating wastewater. Discussed here are the oxidation of PFOA with three different catalysts, development of a method for detecting PFAS, as well as work on 6:2-fluorotelomersulfonic acid (6:2 FTS) and electrodeposited bismuth/tin oxide catalysts.
Read MoreNASF/AESF Foundation Research Project #121: Development of a Sustainability Metrics System and a Technical Solution Method for Sustainable Metal Finishing - 15th Quarterly Report
This NASF-AESF Foundation research project report covers the twelfth quarter of project work (October-December 2023) at Wayne State University in Detroit. In this period, our main effort focused on the development of a set of Digital Twins (DTs) using the Physics-Informed Neural Network (PINN) technology with application on parts rinsing simulation.
Read MoreAESF Heritage: SUR/FIN 2000 – European Academy of Surface Technology Throwing Power Measurement: The Assaf Cell
A throwing power cell is described in detail, which can be used as a small jig and positioned in an electroplating tank. This Assaf Cell is particularly useful for simulating small recesses, typically through-holes found in printed circuit boards.
Practical Observations in Surface Chemistry and Boundary Layer Control to Enable Scalable Electrochemical Operation - The 57th William Blum Lecture
This paper is based on the 57th William Blum Memorial Lecture at SUR/FIN 2023, in Cleveland, Ohio on June 8, 2023, by Dr. Tim Hall, recipient of the 2023 NASF Scientific Achievement Award. It focuses on the practical effects of controlling the boundary and surface chemistry on a wide range of electrochemical applications. After a brief introduction to the concept and principles of surface and boundary layer properties during electrochemical processes, the use of this approach in controlling various physical properties during electroplating and electrochemical finishing is discussed, including controlling coating stress and metal composition, as well as enabling simple water-based electrolytes to polish passive or complex materials.
Read MoreNASF/AESF Foundation Research Project #123: Electrochemical Manufacturing for Energy Applications – 8th Quarterly Report
The NASF-AESF Foundation Research Board selected a project on electrodeposition toward developing low-cost and scalable manufacturing processes for hydrogen fuel cells and electrolysis cells for clean transportation and distributed power applications. This report covers the 8th quarter of work (October-December 2023, continuing work on 3D printing anode support for solid oxide fuel cells and electrolyzers. Work involved the effect of sintering temperature on the amount of porosity and grain size in 3D printed yttria-stabilized zirconia (YSZ).
Read MoreNASF/AESF Foundation Research Project #122: Electrochemical Approaches to Treatment of PFAS in Plating Wastewater - 11th Quarterly Report
In our last report, we described the performance and effect of surface fluorinated Ti4O7 anodes on PFAS degradation in a batch reactor operation mode. In this report, we will discuss the effect of surface fluorinated Ti4O7 anodes on PFAS degradation in a reactive electrochemical membrane (REM) operation mode.
Read MoreNASF/AESF Foundation Research Project #123: Electrochemical Manufacturing for Energy Applications - 7th Quarterly Report
The NASF-AESF Foundation Research Board selected a project on electrodeposition toward developing low-cost and scalable manufacturing processes for hydrogen fuel cells and electrolysis cells for clean transportation and distributed power applications. In this period, we followed our work on 3D printing anode support for solid oxide fuel cells, SOFC (or cathode for solid oxide electrolyzers, SOEC) based on our designed optimization outlined in the previous report. We worked on optimizing the printing parameters, obtaining binder burn out and sintering profiles to obtain printed parts with desired geometry and properties.
Read MoreThe SUR/FIN 2024 Technical Program: Capturing the Flavor
The NASF SUR/FIN 2024 Technical Advisory Committee has organized a program covering the latest in technology in our industry. The program consists of 65 presentations over 12 sessions, covering the latest in the many segments of the surface finishing field. What follows is a sampling of the presentations in each of the 12 sessions, capturing the flavor of the offerings available at SUR/FIN 2024
Read MoreModernizing Wastewater Treatment and Recovery
Source: Kontek Kontek’s “spigot to drain” Source Water and Wastewater Solutions offer integrated technologies to modernize your water & wastewater treatment and recovery.
Read MoreAESF Heritage: Characterization of Deposits, Coatings and Electroforms
During the 1990s, the late Dr. Rolf Weil contributed a monthly column in the AESF journal, Plating & Surface Finishing, in which he described the various methods by which the properties of electrodeposits could be measured and characterized. Topics covered include analytical equipment, measurement methods and specific applications. Dr. Weil's practical approach, in layman's terms, aimed at taking the fear out of using sophisticated equipment. What follows is a collection of several of those columns.
NASF/AESF Foundation Research Project #122: Electrochemical Manufacturing for Energy Applications
This NASF-AESF Foundation research project report covers the ninth quarter of project work (January-March 2024) at the University of Texas at Dallas. In this period, we followed our work on 3D printing anode support for solid oxide fuel cells, SOFC (or cathode for solid oxide electrolyzers, SOEC). We focused on the mechanical properties of 3D printed yttria-stabilized zirconia (YSZ) using a four-point bending test. We then conducted a statistical analysis to characterize the flexural strength of porous 3D printed YSZ.
Read MoreConnect, Collaborate and Contribute to the Industry at SUR/FIN 2024
Atlanta, Georgia, is the home to this year’s NASF SUR/FIN conference and trade show.
Read MoreNASF/AESF Foundation Research Project #123: Electrochemical Manufacturing for Energy Applications - 9th Quarterly Report
This NASF-AESF Foundation research project report covers the ninth quarter of project work (January-March 2024) at the University of Texas at Dallas. In this period, we followed our work on 3D printing anode support for solid oxide fuel cells, SOFC (or cathode for solid oxide electrolyzers, SOEC). We focused on the mechanical properties of 3D printed yttria-stabilized zirconia (YSZ) using a four-point bending test. We then conducted a statistical analysis to characterize the flexural strength of porous 3D printed YSZ. The full paper on the ninth quarter work can be accessed and printed at short.pfonline.com/NASF24June2.
Read MoreLooking Back: The Columnists
Many industrial/technical journals consist of a well-rounded mixture of technical papers, practical articles about technology and how-to-do-it features, including this one, Products Finishing. In its decades of publication, the AESF/NASF journal, Plating & Surface Finishing also endeavored to meet this need. Among the many features were those of the columnists, recognized experts who had expertise in certain segments of the surface finishing industry. This article contains a sampling of columns published in P&SF over the years, which still retain information of importance even today.
Read MoreTake Full Advantage of Industry Events
As travel plans ramp up for the year, what industry events will you attend? Products Finishing offers a quick look at some of the upcoming opportunities for 2024.
Read MoreNASF/AESF Foundation Research Project #122: Electrochemical Approaches to Treatment of PFAS in Plating Wastewater - 10th Quarterly Report
The NASF-AESF Foundation Research Board selected a project addressing the problem of PFAS and related chemicals in plating wastewater streams. This report covers the 10th quarter of work (April-June 2023). Here, we examine the effect of surface fluorination of Ti4O7 anodes on PFAS degradation performance in terms of energy performance as well as formation of chlorate and perchlorate when chloride is present in the solution. The full paper on this work can be accessed and printed at short.pfonline.com/NASF24Feb2.
Read More