PF Podcast
Published

Fall Ecoat Bootcamp Scheduled for October

The Electrocoat Association’s Fall 2023 Ecoat Bootcamp will take place in Raleigh, NC, October 3-5, 2023.

Share

Photo Credit: The Electrocoat Association

The Fall 2023 installment of the Electrocoat Association’s Ecoat Bootcamp is an interactive 2-day program to meet the technical needs of electrocoaters and those interested in learning more about the industry. The event will take place at the Sheraton Raleigh Hotel on October 3-5, 2023.

Attendees will review the basics before taking a deeper dive into cost and process efficiencies, quality control, troubleshooting and innovative technology. Attendees will walk away with ideas and strategies for improving their own systems.

In addition, The Electrocoat Association invites attendees to a complimentary tour of the John Deere Turf Care (JDTC) facility on the morning of October 5. JDTC manufactures Golf and Commercial Mowing Equipment. The paint system has been in operation since 1997 and consists of a 6-stage 1,000-gal spray iron phosphate, chrome seal, and final RO pretreatment process, followed by a 3-stage water-based epoxy e coat process (1- 11,000 gal electrocoat dip tank and 2-1,000-gal post rinses). Ancillary Support Equipment includes a 3 cartridge UF module, e-coat recirculation pump system, 2 DC rectifiers, 14 tube cell anodes, anolyte system, RO water generation system, resin and paste addition equipment, 1- 10,000 holding tank, and a WWT process for pretreatment and electrocoat waste. Additionally, the painting operation includes 2 gas fired ovens for curing e coat and powder, along with 2 powder coat booths (1 green powder and 1 black powder).

There will be a “Meet the Speakers” networking reception held onsite on the first day of the event, providing an opportunity to interact with industry leaders about your system and process or network with other attendees.

For more event details, hotel accommodations or to register, visit https://electrocoat.wildapricot.org/event-5279126 or contact Tarah Grogan at 800-563-8831 or tgrogan@electrocoat.org.

Related Content

Your Best Finish Starts With Us!
Metal Pretreatment Technology
New Acid-Free Bright Nickel Process
The Finishing Industry’s Education and Networking Resource
PF Podcast
PMTS 2025 Register Now!
Filtration Systems
Heatmax Heaters ad with immersion heaters
cfs masking