SanRex Spotlights DCAuto HKD-G Series
A power source for plating small capacities.
SanRex’s DCAuto HKD-G Series comes in a variety of options, including 10A to 100A with 1ph 100V/200V input voltage; 100A to 300A with 3ph 200V/400V input voltage; as much as 30A, natural cooling; 50A to 300A, forced air cooling, but inside is duct structure, so electric components are protected from environment. The series also has a selectable output waveform mode (DC, single-phase full-wave, customized waveform); an open field network as an available option; and weight is 15 lbs. (as much as 30A) to 53 lbs. (300A).
Related Content
-
Cleaning, Pretreatment to Meet Medical Specs ISO 13485 or FDA 21 CFR820
Maximilian Kessler from SurTec explains new practices for industrial parts cleaning, metal pretreatment and decorative electroplating in the medical device industry.
-
Advantages to Pumped Eductor Agitation
Not all agitation methods are created equally. Pumped agitation with eductor nozzles can improve process tanks and quickly show a reduction in operating costs while keeping staff safe, following environmental legislation and preventing pollution.
-
Possibilities From Electroplating 3D Printed Plastic Parts
Adding layers of nickel or copper to 3D printed polymer can impart desired properties such as electrical conductivity, EMI shielding, abrasion resistance and improved strength — approaching and even exceeding 3D printed metal, according to RePliForm.