sales
NON-CYANIDE BRASS PLATING BATH
Can you recommend a cyanide free brass plating bath replacement?
Read MoreNICKEL ON BRASS AND POROSITY
We are looking for a test that will allow us to determine the porosity of the nickel layer on the brass substrate. Can you give us some direction?
Read MorePLATING ON TITANIUM
I am looking for a good procedure for plating copper on commercially pure titanium.
Read More“GROWING” COPPER PLATING BATH
Our cyanide copper strike bath builds up copper metal over a period of time. What causes this, and how can we prevent it?
Read MorePinhole size air pockets
Do you have any ideas on how to get rid of pinhole size air pockets in the coating?
Read MorePAINT CONVERSION BY TOP-FEEDING
What is your opinion on converting from one company’s epoxy E-coat paint to another supplier’s paint by top-feeding?
Read MorePAINTING GALVANIZED TANK
I have a 750–1000 gal galvanized holding tank used for maple syrup production. I would like to remove the rust and coat the inside of the tank. Because of the use and need for it to be food safe I am unsure of what to use to coat/paint it. Any ideas? Also, if you have another recommended paint application method besides electrostatic, I’d be willing to entertain that too.
Read MoreMore on Type I vs. Type II Anodizing
In a question I addressed back in May, C.S. asked about rinsing Type I (chromic acid anodizing) coatings vs.
Read MoreMIGRATIONS
What do you recommend as a minimum thickness for the copper intermediate layer?
Read More
