sales
The Burn that STILL Burns, Part 3
In November 1978, Products Finishing magazine published “The Burn That Burns,”1 which examined true burn and false burn from bright nickel and chromium systems, as well as some of the remedies. Twenty-six years later, plating practitioners continue to be challenged and frustrated by this aspect of the process, prompting this updated and expanded review. Here, in part two of this three-part series, our authors analyze three of the four major sources of false burn…
Read MoreSolving Conveyor Line Problems
Question: Having performed many conveyor chain pull calculations over the years I can tell you that any change to the configuration of the conveyor layout will affect the chain pull and the tension.
Read MoreBlisters and Zinc Plating
Question: We are having trouble with blisters in our chloride zinc barrel line and our alkaline zinc barrel line. The substrate is hardened steel. Our lines are traditionally configured, except we don’t have triple rinsing after each step.
Read MoreSpotting an Achievement Gap
One of the toughest jobs supervisors face is getting across to their employees that results—not only good intentions —are what really count.
Read MoreLight Coverage Powder Coat
Question: We use a black-texture powder coat that might be two mils thick and very fine textured.
Read MorePutting The Brakes On Lead and Cadmium
Ambrake Manufacturing had to remove lead and cadmium from its electroless nickel solution in order to comply with the End of Life Vehicle Directive. The company turned to its electroless nickel suppliers for support...
Read MoreBlisters on Belt Buckles
Question: We manufacture belt buckles that are diecasted using the zinc alloy, zamac3.
Read More