Articles
GM Truck Plant Uses High-Output Lighting for Paint Inspection
The perpendicular lighting fixtures provide GM with the ability to detect paint and metal imperfections, allowing them to correct flaws and enhance finishes…
Read MoreTooling Up a Tough Thin Film
These thin-film coatings applied using PVD and CVD processes are tougher and longer lasting than your average tool coating…
Read MoreNon-Electrolytic Aluminum Oxide Conversion Coating
A non-electrolytic method can be used to produce a thin aluminum oxide coating of the same or better quality as an electrolytic conversion coating while using environmentally friendly and non-toxic materials...
Read MorePerspectives: The High Cost of Corrosion
A two-year study sponsored by NACE, the International Corrosion Society, estimates the cost of corrosion in the United States to be $267 billion annually.
Read MoreDot Commentary: Size Matters
Ok, stop snickering… I’m referring to an article (“The Technology of Tiny Parts”) that PRODUCTS FINISHING published last month in which we profiled Professional Plating, a company whose expertise is the plating of minuscule parts used in hearing aids, telecommunication devices, computers and other electronic systems.
Read MoreWastewater Treatment Made Simple
A single-step treatment to help finishers meet the MP&M challenge…
Read MoreThe Environmental Benefits of Composite Electroless Nickel Coatings
Because of the negative environmental and health effects related to chromium, finishers are looking for a replacement. Composite electroless nickel coatings may be one solution…
Read MorePerspectives: The Air We Breathe
The air you breathe when you are outside is getting better; however, the stuff you are breathing at home and in the office is getting worse.
Read MorePowder Coating Filter Saves Time & Money
Because of the high film builds required for its parts, Smith-Blair sprays an average of 400 lb of powder per day per booth. To keep quality high, the company has installed a new powder coating filter…
Read MoreOn My Mind: Strength or Growth?
Usually, a company acts either as a growth company or a strength company.
Read MoreRolling Ring Linear Motion in Finishing Machines
Rolling ring linear motion assemblies may be used in a wide range of finishing machines, performing applications such as painting, coating, positioning, cutting, spooling/winding, spraying, slitting and packaging...
Read More