Contact
Painting ABS and Other Plastics
I want to paint ABS parts. What types of paint will adhere to the surface? Do I need a primer? Do I need to sand the surface before solvent wiping?
Read MoreSilicone Wrist Bands Causing Defects
I have had several people inform me that the colored, fund raising, wrist bands people wear supporting different causes will indeed cause paint defects due to them being made of silicone. Do you have any proven facts about this subject?
Read MoreIn-Mold Paint
Do you know of any kind of in-mold paint that is compatible with polyurethane?
Read MorePaint Line Energy Reductions
What can we do to reduce the amount of energy used in our paint line?
Read MoreCatalyzed Coating Pot Life
How long after a two-component paint is catalyzed can it be used?
Read MoreEmbrittlement Issues
We are thinking about increasing current density in one of our barrel plating lines and assume that the parts will be subject to increased hydrogen embrittlement. Is this a fair assumption?
Read MoreUsing Too Much Paint
Question: We have an automated spray painting line running the same mix of ware day in and day out.
Read MoreFluid Flow Monitoring
Question: We recently up-graded our production line during a plant modernization.
Read MoreHot Dry-Off Oven Causing Problem
Question: I recently read somewhere that operating a dry-off oven at temperatures in excess of 250°F can cause flash rusting to appear on iron phosphated steel articles.
Read MoreCoating to Replace Liquid Rust Preventative
Question: I am the plant manager of a specialty steel manufacturing shop.
Read MoreCoating Nickel Plated Parts
Question: I am the engineer in charge of the coating line at our plant.
Read MorePaint Film Thickness Variations
Question: I would be grateful for any help you can give me on the following subject.
Read More
