sales
Waterborne Symposium 2014 Announces Program
The event kicks off with the Short Courses from February 24 – 25, followed by the Technology Showcase Exhibit Hall from February 25 – 27.
Read MoreWire Pitting
Could a change in the supplier of wire parts be the cause of increased pitting after plating?
Read MoreIncoming Rust Inhibitors
We have a five-stage wash system using an alkaline cleaning package. Should the rust inhibitors coming in on our parts be water-soluble?
Read MoreClear E-Coat Over Chrome?
Can a clear e-coat be applied over a chrome-plated surface (brass or zinc)?
Read More
AAC Announce its Level 1 Workshop for 2014
This day long program is packed with anodizing information for those new to the industry, or those who want a refresher course on the basics.
Read MoreMinimizing Shear on Paint
If you split flow streams in an e-coat paint recirculation line, what is the best method for manipulating flow rates that would minimize excessive shear on the paint?
Read MoreControlling Paint Film Thickness
How can I achieve a paint film that is less than 1 mil (0.001”) thick?
Read MoreArtistic Application of Electroplating
I want to plate a pattern onto the metal cathode, moving a sharp/pointy anode around to trace out the pattern, but I can’t decide what metal to plate and what solution would be best.
Read MoreMilitary Specification Approval
Who or what government department handles Mil Spec approval?
Read MoreCleaning an E-Coat Oven
How can we clean an electrocoat oven for producing high-quality parts?
Read More
