EXEL North America named Sherwin-Williams Vendor of the Year
EXEL North America is an expert in finishing and dispensing solutions and introduced the patented Airmix technology in 2013, resulting in a winning program for both Sherwin-Williams and its customers.
EXEL North America's team receives their award. See below for caption.
The Product Finishes Division of Sherwin-Williams has announced its 2013 ProVisions Vendors of the Year Award Winners: EXEL North America and Nexeo Solutions. Touch Up Solutions and Fandeli were winners of the Field Sales Support Award. The awards were handed out during a vendor appreciation program at the Gaylord Opryland Resort & Convention Center in Nashville, Tenn. on January 29.
ProVisions is part of Sherwin-Williams’ complete product finishing solution offered to OEMs and job shops. In addition to the complete line of Sherwin-Williams coatings, customers have access to more than 10,000 of the supplies and equipment they use most, including test and safety equipment, abrasives, and spray equipment.
EXEL North America is an expert in finishing and dispensing solutions and introduced the patented Airmix technology in 2013, resulting in a winning program for both Sherwin-Williams and its customers. Nexeo Solutions provides thinner/reducer products and is a back-to-back winner as a result of its successful product program for Sherwin-Williams.
In the photo above, the Product Finishes Division of Sherwin-Williams ProVisions 2013 Co-Vendor of the Year Award presenters and representatives from EXEL North America, left to right: Bruce Irussi, Senior Vice President, Sales – North America, Product Finishes Division of Sherwin-Williams.; David B. Sewell, President & General Manager, Product Finishes Division of Sherwin-Williams; Rhonda Joslin, Marketing Manager, EXEL North America; Wayne Blackwell, Midwest Regional Sales Manager, EXEL North America; Tom Brown, Regional Sales Manager, EXEL North America; Regan Murray, President, EXEL North America; John Gulbronson, Vice President, Standard Product Sales, EXEL North America; Bob McElroy, Marketing Manager – Sales Program Support, Product Finishes Division of Sherwin-Williams; Laura Kelleher, Vice President – Marketing, Product Finishes Division of Sherwin-Williams
Related Content
-
Top 5 Areas to Consider Automation of Plating Operations
Automation for finishing operations can lead to improvements in process time, repeatability and consistency of quality. Yet, processes that make sense to explore for these operational efficiencies may not always be readily apparent.
-
NASF/AESF Foundation Research Project #122: Electrochemical Approaches to Treatment of PFAS in Plating Wastewater - 9th Quarterly Report
The NASF-AESF Foundation Research Board selected a project addressing the problem of PFAS and related chemicals in plating wastewater streams. This report covers the ninth quarter of work (January-March 2023). In this report, we describe our work on evaluating the performance of PFAS degradation by electrooxidation using surface fluorinated Ti4O7 anodes in batch mode.
-
NASF/AESF Foundation Research Project #121: Development of a Sustainability Metrics System and a Technical Solution Method for Sustainable Metal Finishing - 15th Quarterly Report
This NASF-AESF Foundation research project report covers the twelfth quarter of project work (October-December 2023) at Wayne State University in Detroit. In this period, our main effort focused on the development of a set of Digital Twins (DTs) using the Physics-Informed Neural Network (PINN) technology with application on parts rinsing simulation.
