John Fletcher Stands Down as Chairman of ASTM D01 Paint Committee
Fletcher ill continue his role as Chairman of D01 Sub-committee D01.23: Physical Properties of Applied Paint Films.
![](https://d2n4wb9orp1vta.cloudfront.net/cms/PF/Blog/JFF IMG_0591Feb 2016.jpg;maxWidth=600)
Elcometer Limited’s Technical Support Manager, John F. Fletcher, has stood down as chairman of the ASTM D01 Committee on Paint and Related Coatings Materials and Applications after three successive two-year terms in office.
Fletcher received an Award of Appreciation in recognition of his outstanding service as an ASTM Committee Chairman from the beginning of 2010 to the end of 2015, at the ASTM D01 meeting in San Antonio, Texas, at the end of January 2016.
Fletcher has stepped down as the ASTM constitution limits an individual to three successive two-year terms as Chairman of D01. He has now become the first vice chairman in support of the new Chair, Cynthia Gosselin.
Fletcher will continue his role as chairman of D01 Sub-committee D01.23: Physical Properties of Applied Paint Films, which holds its Task Group and Sub-committee meetings on the Mondays when the D01 Committees meet. The D01.23 Sub-committee has 31 standards under its jurisdiction.
The D01 Committee currently has more than 630 members and holds two sets of meetings each year in January and June. The Committee is supported by approximately 30 technical sub-committees and a further seven administrative committees. D01 is responsible for a total of more than 675 individual standard test methods, practices and guides, which are published in the Annual Book of ASTM Standards, Volumes 6.01, 6.02, 6.03, and 6.04.
These standards have and continue to play a pre-eminent role in all aspects important to the coatings industry including: classification, sampling, preparation, components, application, analysis, quality assurance and end-use performance requirements.
For information, visit elcometer.com and elcometerndt.com
Related Content
-
In-House Blackening of Ferrous and Non-Ferrous Metals
Process satisfies customers’ shipping requirements while meeting stricter water regulations in times of drought.
-
Bryan Leiker, MFACA, Discusses CARB Public Hearing Over Calif. Hex Chrome Ban
Bryan Leiker, executive director, Metal Finishing Association of California, offers a recap of a January 27, 2023, public hearing conducted by the California Air Resources Board prior to an impending ruling on a proposed ban of hexavalent chromium use for finishing operations in the state.
-
Finishing Another Year — Looking Back at the Trends of 2023
Products Finishing reflects on a year of reporting on the surface finishing industry and looks ahead to what may be in store for 2024.