Articles
CCAI Honors Chapter, Installs Officers and Board
The CCAI Chapter User and Supplier of the Year awards and the James F. and David J. Wright Lifetime Achievement Award were presented during the Annual Awards Ceremony, also held during the Annual Meeting.
Read MoreTop Gun Powder Coating Expanding To New Location, 70+ Jobs
Leading provider of world class architectural finishes, will expand to create a total of 70 new jobs in Adairsville and Jasper in Georgia.
Read MoreBalancing an Electroless Nickel Bath to Optimize Performance
While today’s EN baths are much more user friendly than they were even 10 years ago, plating shops still strive to maintain consistent, trouble-free operation. The following provides a basic understanding of EN bath control.
Read MoreParts Cleaning: Does the Cleaning Agent Work?
Cleaning is a process. For this discussion, let’s focus on the cleaning agent itself. Choosing the right cleaning agent (aqueous or solvent) involves a number of factors.
Read MoreParts Cleaning: Aqueous System Handles Tighter Cleaning Specs for Intricate Plans
Where 10 years ago, particle sizes of 1,000 microns captured in a millipore patch test might have been acceptable, today heavy equipment OEMs commonly demand maximum particle sizes of 600 microns or less.
Read MoreParts Cleaning: Understanding the Process of Vacuum Cycling Nucleation
VCN process is accomplished by reducing the total pressure in a controlled-environment chamber that contains the components to be cleaned submerged in a solvent or an aqueous solution.
Read MoreGo-To-Guy: Dave Dunn, Operations Manager, Silvex
Dunn began at Silvex (Westbrook, Maine) in 1976 as a driver. Through the years, he has worked as the shipping and receiving manager, production supervisor and in sales.
Read MoreBuilding a Better CARC Coating
U.S. Army's ECBC research will ultimately improve combat vehicle protective coatings.
Read MoreCoating Plastic Parts More Efficiently
Quality, costs and sustainability in focus with liquid coatings.
Read MoreSouthern Aluminum Finishing Celebrates 70th Anniversary
At its founding in 1946, SAF was one of only two anodizing lines in the country; founder Marvin McClatchey was a chemical engineer and pioneer in anodizing for architectural applications.
Read MoreWichita's Metal Finishing Signs Deal With France-based Figeac-Aéro Groupe
The company says that the work will involve finishing the door program of the Boeing Co.’s 787 Dreamliner, and will cover services from both its facility in Wichita and in Mexico.
Read MorePPG ice-deterrent coating for airplanes highlighted at Farnborough
Unique coating, which is still development, helps to eliminate ice build-up on airplanes for increased fuel efficiency, enhanced safety and less required maintenance.
Read More