MMS Blog
Just How Clean Is Clean?
Most finishing consultants have lost count of the number of times that inadequate cleaning and pretreatment was the cause of defective painting or plating. Skip plating, blistering, delamination—these are just some of the commonly found defects caused by poor cleaning.
Read More
Adding E-Coat to an Existing Powder Coating Line
If sales for your finishing business have been declining, you may need to consider adding a new coating line to bring in new business. An option may be to add an electrocoat system to your current powder line to increase your coating capabilities.
Read MoreNEWS: Water Company Finds Source of Hex Chrome: Itself
The Louisville Water Co., which serves about 850,000 residents with water in the Kentucky region, found the source of its hexavalent chromium issues: its own equipment.
Read More
Bernard Downey, Coating Pioneer, Passes Away at 88
Founder and president of B.L. Downey Co., a 325,000sf2 facility that specialized in e-coat and powder coating.
Read MoreA “Bizarre” Approach: Using Moisture to Cure CARC Coatings
When veteran inventors Mike Bunnell and Daryl Bruischat put their minds together to build a better mousetrap for the drying and curing of waterborne CARC paints, they both hoped to come up with a system that might change the industry somewhat.
Read MoreNavy Is Full Steam Ahead On Powder Coating
With the military increasing its use of powder-based coatings to cover vehicles, equipment and ships—the Army has recently announced that it will allow the use of powder coatings in its CARC coverings that are normally e-coated—more assets are getting the powder coating treatment than ever before, much to the joy of the powder manufacturers.
Read MoreThe EPA’s Common Sense Initiative and Its Legacy on the Finishing Industry
The Common Sense Initiative was the centerpiece of the U.S. Environmental Protection Agency’s much-touted regulatory reinvention in 1994. Called a “bold experiment,” the EPA developed the Common Sense Initiative to address claims that its regulatory process had become burdensome, inefficient and costly.
Read More
Valley Chrome Plating Receives National EPA Award
Lead anodes at VCP facility switched for graphite ones and hexavalent chromium replaced with the more environmentally friendly trivalent chromium.
Watch
MATT KIRCHNER: "The Number One Problem Facing Surface Finishers Today"
Matt writes: With nearly one in five American workers either unemployed or underemployed it seems inconceivable that coaters and manufacturers alike would have such a difficult time finding the right people.
Read More
Powder Coater Turns To Flashy Football Helmets
Oregon company sees sales soar with novelty paint applications
Read More
FTC Says Graco-ITW Deal Violates Anti-Trust Laws
The FTC charges that if the proposed acquisition were completed, the combined firm would control a dominant share of all North American sales of industrial liquid finishing equipment and have a monopoly specifically in the market for circulation pumps used in paint systems in the automobile industry.
Read More
New Coating Could Make iPhones Waterproof Without A Case
Liquipel claims to make smartphones water resistant by bonding it inside and out with a "nano" coating which repels water
Watch
