MMS Blog
Flipping the Switch on Anodizing
The idea of using square pulse anodizing is to have a higher average current density for the total process and thereby reduce the process time. When pulsating between two values of current density, a high period and a low period give the aluminum surface time to recover during the low-current-density period.
Read More
How Fabricators and Finishers Can Finish the Job—Fast
Fabricators and finishers can work together to reduce lead-time. Sheet metal fabricators and custom coaters—so alike in some ways, unlike in others—sometimes clash. Both juggle myriad orders of varying quantities and due dates, and both measure success on throughput: the more work they ship during a given period, the more revenue they can expect.
Read More
Is Lean and Green Possible in the Finishing World?
Is it possible to be both lean and green in the finishing world? Lean manufacturing says that money spent on resources for any goal other than the creation of value is wasteful and should be eliminated.
Read More
Ripple Effect: Researchers say leveling of electrodeposits can be achieved by applying a small forcing voltage
Seeking smoother plating deposits? It may be all in the waves. This story looks at studies that have shown that superimposition of a small sinusoidal potential wave (smooth, repetitive oscillation) onto a potentiostatic bias can lead to more level electrodeposits in finishing.
Read More
Ask The Expert: Corrosion Under Powder Coating
Q. We’re powder coating on sheets of cold-rolled closed annealed parts. We found that, after some days, the color is peeling off, and we have found corrosion beneath that. Is there a solution, or should we switch to another process?
Read More
PPG Chromate-Free Primer, Pretreatment on Boeing Next-Generation 737, and VIDEO
A chromate-free metal pretreatment and an exterior decorative primer are now standard on Boeing Next-Generation 737 production airplanes. Watch video of the 737 being built in 3 minutes!
Watch
Ask An Expert: Blistering of Anodic Coating on 7075 Alloy
Q. We are facing a blister problem on 7075 alloy inside the bore diameter of our cylinder base. We noticed that this problem is occurring during dyeing process and not after hard anodizing. Can you please advise us what could be the reason? S.C.
Read More
NASF Connecticut Chapter Holding Supplier Exhibition March 6
All proceeds at the event are used to sponsor the Connecticut Branch’s College Scholarship, which is given to a child of a Connecticut Branch member.
Read More
Electronic Precision Specialties Wins 'Metal Finishing Model Shop Award'
The California/EPA Department of Toxic Substances and Control has recognized Electronic Precision Specialties, Inc., with the "Metal Finishing Model Shop Award," only the fourth shop to receive the award.
Read More
Deburring Change Earns 'Find-It Fix-It Challenge' Award
Award recognizes and rewards simple and effective workplace solutions that result in increased productivity, improved worker morale, and fewer workplace injuries and illnesses.
Read More
PPG Aerospace Donates Coatings to Restore V-22 Osprey Aircraft for Museum
One of six Bell Boeing V-22 Osprey tiltrotor combat aircraft used for full-scale development has been restored with coatings donated by PPG Industries' PPG aerospace business for display at the American Helicopter Museum and Education Center in West Chester.
WatchMilitary “STARs” Are Born With Paint Facilities
The Yermo Annex Marine Corps. Logistics Base in California and the Corpus Christi Army Depot Aviation Center in Texas have acquired new systems to help train and enhance employees’ painting abilities.
Read More
