MMS Blog

1 Apr 2011

Rent an E-Coat System? Now You Can

Imagine turning space usually set aside for storing parts needing to be shipped out for e-coating into an actual e-coat assembly, one that a plant could lease for a specific job and then turn it back in when the job is finished.

Liquid Coating 1 Apr 2011

PCX PREVIEW: Precision Cleaning

In the finishing world, there are four common precision cleaning processes: hydrocarbon, aqueous, semi-aqueous, and vapor degreasing. Each has its strengths and disadvantages, but one of the biggest problems with aqueous and semi-aqueous cleaning is the quantity of electricity they take.

Liquid Coating 1 Apr 2011

Painting on Oil ... Rigs that is

When part-time oilman Terry McIver went to Brady, TX in 2004 to buy a used drilling rig, he was surprised to find the company he was visiting was going bankrupt and had just two employees left from over 200 it had a year earlier. Brady left with the oil rig, but a few months later he went back and bought the company.

2 Mar 2011

Getting a Good Finish Begins with a Great Start

Virtually all metal parts and many plastic parts have some sort of finish applied to them. These finishes are applied to improve appearance, increase corrosion resistance and enhance wear resistance.

2 Mar 2011

A Shop for All Reasons

When Dennis Doane started his new metal fabricating endeavor in 2003, he selected the name A-1 Fabricators and Finishers for his Cincinnati-area company. It also helped years later, now that he has added a powder coating line to his repertoire.

1 Mar 2011

Pre-Colored Stainless Steel Improves Product Design, Productivity

Sandvik Materials Technology has rolled out a pre-coated metal strip steel intended to boost productivity and reduce environmental constraints associated with plating and coating in multiple industries.

1 Mar 2011

Smooth Operators: Attaining Isotropic finish through chemically accelerated vibration

It seems recently there has been more talk about the advantages of an isotropic, non-directional finish on machined surfaces obtained through a chemically accelerated vibratory process.

1 Mar 2011

Power Up to Cut Down on Energy

Electrocoat rack stripping is a substantial cost to coaters, so it is imperative to use practices that reduce high energy requirements and identify techniques to minimize these costs that contribute to the electrical contact defects.

1 Mar 2011

Open for Inspection: DuPont '20 Group' Peer Reviews

The concept is simple: Several times a year, bring together a group of non-competing powder coaters to a fellow member’s plant and have them go through the inner workings with a fine-tooth comb, reporting observations in a no-holds-barred format designed to improve efficiencies, quality and bottom line.