MMS Blog
Finisher's Think Tank: Rinsing: An Important Part of the Cycle
The following points may apply to specific metal finishing operations, such as: plating, painting and powder coating, anodizing, colorizing, oxidizing and other specialties.
Read More
Advice & Counsel
While I am familiar with iron and zinc phosphating, my facility is considering the addition of a manganese phosphating line and I am wondering what the differences are.
Read More
Promoting Surface Finishing in Creative Ways
One of the association’s priorities has been to promote surface finishing and educate new audiences about the industry and its value, and to do it in creative ways.
Read More
New Developments in Corrosion Testing: Theory, Methods and Standards
This paper will give a broad overview of the newest developments in corrosion tests and their implementation in automotive standards.
Read More
Investigation of the Blackening Process of Electroless Nickel-Phosphorous Coatings and Their Properties
Electroless black nickel-phosphorus plating is an advanced electroless nickel plating process formulated to deposit a black finish when processed through an oxidizing acid solution.
Read More
An Overview of Hard Chromium Plating Using Trivalent Chromium Solutions
For more than forty years, academic and industrial researchers from all over the world have taken a strong interest in alternative processes for hard chromium plating using hexavalent ions. The benefits of substitute processes are obvious, as the toxic and carcinogenic aspects of hexavalent chromium are well known.
Read More
Fact or Fiction: A Belated Thanks to The Internet
I've published almost 200 articles in either P&SF or other places. There isn't much I would change about my views covered in these publications, yet one stands out as an exception.
Read MoreQuestions and Answers for Painting Anodized Aluminum
We paint parts made of anodized aluminum. Suddenly, we are having a problem with paint adhesion. Is this an adhesion problem? What are the pros and cons of painting anodized aluminum?
Read MoreBurn-off Ovens: Fixing a Wrong the Right Way
For those in the finishing industry, you may be seeing something very soon that comes around about as often as a comet.
Read More
7 Changes to Reduce Spray Costs Immediately
Jon Barber of Spraying Systems Co. in Wheaton, IL, says that the sluggish economy often causes manufacturers to convert their “cost management” programs into “cost reduction” programs.But Barber warns that cutting costs can have a negative impact on products and process quality, and can actually lead to higher scrap rates, costlier product recalls and unhappy customers.
Read More
The Challenge of Electroplating Cast Iron Components
Manufacturing from cast materials is a cost-effective method to form complex shaped components.
Read More
Electroless Nickel Solution Adds Chemical Marker
The day may have arrived when finishers can now grab a small electronic device and test to see if the rejects coming back to them were actually finished in their shop, and not, say, in the customer’s second-source finisher.
Read More
