We are using a number of different plating vendors with the same result: delayed blisters and stains. The blistering and staining does not occur all the time, and none of our suppliers has been able to define root cause. What are your thoughts on this?
Our sulfamate nickel plating bath is giving us problems. Most recent tests show the chloride content to be 10.15 g/L, and our control limits are 3-9 g/L. What can I do to reduce the chloride content? What will happen if the chloride content is too high? What caused the chloride content to increase?
Our company produces pendants and other jewelry parts out of Zamak metal. We find that the finished products have pores that we are unable to cover with the copper plating that we apply. Can you suggest any processes that will cover these pores?