Carl Izzo Consultant

Parts Cleaning

Painting Tank Interiors

Some of the tank interior floors receive a paint touch-up after testing and before shipping because people walk on the inside during the inspection. Recently, I got a customer complaint of soft uncured paint on the tank floor when it was opened for inspection prior to filling. I can’t understand how this happened.

Read More

Spray Booth Selection

I would be obliged if you could advise me on which of the following two spray booths is best for my application.

Read More
Liquid Coating

Painting Over Powder Coating

How safely can they apply their wet paint over our powder coated parts?

Read More
Liquid Coating

Metallics Appearance Repeatability

We make a line of scientific instruments and are in the process of introducing a new line. We are having some issues with a gold metallic paint used on them, in terms of the repeatability of its appearance. Since we don’t do painting in-house, the parts in question are outsourced to a custom painting shop. When they come back, they are all over the map in color and gloss.

Read More
Parts Cleaning

Dust in the Paint Film

We are painting a plastic part using a two-coat system. The problem is that we have a lot of scrap due to what looks like dust in the paint film.

Read More
Liquid Coating

Going Fishing

We are planning to reopen the factory and would be very pleased if you could update us on the latest painting procedures and paint materials used today so we can be competitive in the coming years.

Read More
Liquid Coating

Painting Water Storage Tanks

We have to fabricate and paint some fire protection water storage tanks. The specifications call for mill galvanized, not hot dip galvanized steel as the construction material.

Read More
Liquid Coating

Wire Coat Hangers

How do I apply flocking material?

Read More
Liquid Coating

Blistering Paint

My company produces cold rolled steel equipment boxes for both interior and exterior use. Indoor boxes are fabricated from cold rolled steel and outdoor boxes are fabricated from hot dip galvanized steel. After we upgraded our finish system from alkyds to polyesters, we had problems on the hot dipped galvanized boxes in the form of blisters.

Read More
Liquid Coating

Biocompatible Coatings

Can you recommend biocompatible organic coatings for this application?

Read More
management

Better Transfer Efficiency

To protect and preserve the brass plating, we coat these parts with a clear lacquer using a conventional air spray gun. Needless to say, we get poor coverage on the parts with a lot of overspray. Consequently we use a lot of lacquer. Because of the rising prices of coating materials, I’ve been asked by management to reduce our manufacturing costs.

Read More
Parts Cleaning

Smoothing Rough Castings

Do you have a coating that would be easy to apply and quick drying that would improve the appearance of our castings and eliminate the hand grinding?

Read More
The Finishing Industry’s Education and Networking Resource
Pretreatment Washer and Finishing Equipment
Metal Pretreatment Technology
find masking products online
plating and surface finishing additives
PF Podcast
Heatmax Heaters ad with immersion heaters
OptiCenter All-in-One OC11
OptiCenter All-in-One OC11