Contact
Tungsten Carbide Precision Wear Parts
Question: I represent a manufacturer of tungsten carbide precision wear parts.
Read MoreChoosing a Spray Gun
Question: We are a machine shop for aircraft parts and are starting up a paint line.
Read MoreMass Painting Steel Bolts
Question: We manufacture Grade-8 bolts and apply a black oil finish.
Read MoreCoil Coating 101
Question: I am a masters-degree student of materials engineering at my university.
Read MoreHumorous, Scary and Practical Advice
Question: I just finished reading your August 2004 column in Products Finishing.
Read MoreVinyl Caps for Wire Ends
Question: We use a piece of heavy gage wire in one of our products.
Read MorePainting Cast Iron
Question: We manufacture water features for fountains, pools and ponds.
Read MoreAccelerated Aging Tests
Question: I recently experienced a failure on an accelerated aging test of a polyurethane coating system.
Read MorePaint Compatibility
Question: With regard to the question "Painting Cast Iron Valves" sent in from P.J., there are so many unanswered questions in my mind concerning his high rework rate that he says is close to 100%. It may sound strange, but I could feel the frustration in myself in not being able to evaluate his set up and solve his problem.
Read MoreMore on Painting ABS Plastic
Question: These remarks relate to the problem question in the July 2004 issue.
Read MoreNon-Visible Infrared/Ultraviolet Paint
Question: Here at our Automation Technology Laboratory at the University, we’ve been using “landmarks” for mobile robot navigation.
Read MoreCustom Coaters
Question: I’m a partner in a small manufacturing company that specializes in general machine work for the aircraft industry, the government, and the commercial industry.
Read More
