Contact
Powder Coating Q&A: Adding More Cure Capacity
Can the powder material supplier change the new powders so they will work in our oven?
Read MorePowder Coating Q&A: Proper Coating for Steel Tubing
Do you have a recommendation for a powder coating for steel tubing?
Read MorePowder Coating Q&A: Powder Coating Assembled Parts
Do you have any ideas about how we could cure a powder coating without causing damage to the sensitive parts?
Read MorePowder Coating Q&A: Pretreatment for Different Metals
We are planning to install a powder system for our HRS structural parts. What are my options are for the different metals?
Read MorePowder Coating Q&A: Lighting for a Powder Booth
We need to add more lighting to our powder booth and application area.
Read MorePowder Coating Q&A: Powder Coatings for Outdoor
Can you tell me what powder we should consider, and how well it will meet the architectural specifications?
Read MorePowder Coating Q&A: Can Powder be Applied Over Zinc Plating?
Can powder coating be applied over steel parts that have been zinc plated type II SC2 black?
Read MorePowder Coating Q&A: Curing Powder and Liquid Paint in One Oven
What are the pros and cons of using a common curing oven for powder coatings and liquid painting?
Read MorePowder Coating Q&A: What is Causing White Specks in the Black Powder?
There are white specks all over the parts. What could be causing this issue?
Read MorePowder Coating Q&A: Proper Coating for a Public Restroom
What do you think would be the proper coating for a public restroom?
Read MorePowder Coating Q&A: Pretreatment Methods
Are there simple pretreatment options that will work with powder coating and help to limit rust on steel surfaces with a lot of welds and other complex issues?
Read MorePowder Coating Q&A: Powder Cure Temperatures
Is there a polyester powder or other powder chemistry that can be cured below 250°F?
Read More
