Ask The Expert
What's the Best Coating Method for Extended Outdoor Performance?
For long-lasting powder coating that holds up outdoors, consultant Rodger Talbert suggests pretreatment and washing options, a primer layer and a top coat.
Read More
Selecting PPE for Your Paint Shop
Guidelines for determining the appropriate personal protective equipment for a painting operation.
Read More
Tips for Optimizing or Expanding Your Anodizing Line
Jim Acquaviva, director of business development for Technic Equipment, offers advice for assessing areas of process improvement for anodizing operations, outlining helpful steps for an end-user self-assessment.
Read More
Understanding Paint Atomization
BASF coatings development expert Tim December explains how paint atomization works for both pneumatic spray applicators and high-speed rotary bell applicators.
Read MoreReducing Waste in Your Powder Coating Facility
Finishing industry consultant Rodger Talbert explains ways to reduce waste, heat in your powder coating facility.
Read More
Troubleshooting Bright Nickel Processes: How to Identify the Problem
For bright nickel process troubleshooting, Doug Lay of Coventya suggests narrowing the scope with a checklist.
Read MoreControlling Quality of Zinc Flake Coatings on Steel Fasteners
Scott McEuen, North American business development manager of zinc flake coatings at Atotech, explains how the quality of zinc flake coatings depends on good adhesion and bonding to the substrate of the fasteners.
Read More
Silane-based Multimetal Pretreatments for Powder Painting
When looking to switch from phosphate conversion coatings, Stewart Tymchuk from Dynamix suggests looking at silane-based products for powder coating pretreatments.
Read More
Electric vs. Pneumatic Agitators: What Makes Sense?
When determining the need for an agitator, says Mike Elberson from Autoquip, you must look at budget versus long-term energy conservation.
Read MoreFixing Dull Parts From Alkaline Zinc-Nickel Bath
A lack of expected brightness is a common malady affecting many alkaline zinc-nickel platers, and MacDermid Enthone’s Adam Blakeley provides some answers to fix it.
Read More
