Parts Cleaning
Study Shows Electric Impulses Sterilize Industrial Water, Paints
Sterilization of industrial water and paints with electric impulses is the objective of the DiWaL cooperation project funded by the Federal Ministry of Education and Research.
Read MoreHow to Use Pretreatment to Improve Salt Spray Hours
Q. Our goal is to have our gas regulators pass ASTM B117 for 500 hours. We use an epoxy powder coat; parts are treated with zinc phosphate first, then powder coated. We are seeing the internal parts of the castings rusting prematurely. Which spec could I call out to increase corrosion protection, MIL-DTL-16232G Type Z, class? Or TT-C-490, Type I?
Read MoreGreatness Begins with a V1 Moment
With commitment and courage, success is pinned to taking risks.
Read MoreHow to Strip Zinc Phosphate Without Using Chromic Acid
Q. I want to remove zinc phosphate from hardware parts after cold heading. Typically to remove zinc phosphate, I would soak in chromic acid at a high temperature, but this is not a viable or safe method for bulk treatment. Can I just hit the parts with a higher concentration of potassium hydroxide at a higher temperature to remove the zinc phosphate?
Read MoreIntermittent Phosphate Line Usage
Q. I inherited a cleaning and phosphate line and over the last two weeks, we have lost our phosphate solution twice. I am told it is because we have lost iron in the solution. Is there an additive that can be used to help maintain the solution as the tank is not in constant use?
Read MoreLife Cycle: Powder Coat Turns Bikes into Fine-Tuned Machines
Two San Francisco bike makers turn to powder coating to finish their custom products.
WatchKyzen, CJI Host 'Clean and Green' Seminar June 13-14
The two firms will be offering two days of training, with several technical sessions and hands-on testing throughout the day. The training is free, but space is limited.
Read MoreParts2Clean Show Addresses New Cleaning Challenges
Global trends such as electromobility, lightweight construction, Industry 4.0, sustainability and more at show Oct. 24-26 in Stuttgart, Germany.
Read MoreHow to Stop Outgassing with Die-Cast Parts
Q. We run aluminum extrusions using a chrome treatment conversion coating. We began running aluminum die-cast parts and are seeing small blisters and holes in the coating. How can we stop this?
Read MoreChemetall Receives Highest Airbus Award for Third Time
Only four out of a total of 68 strategic key suppliers of Airbus have received this "Accredited Supplier" award in 2016.
Read More