curing
2K Paint System Is A-OK
Switching to a 2K system proves cost-effective for computer makes large, complex industrial compression equipment that requires a durable finish that is corrosion-proof and chemically resistant.
Read MoreA Conversation With ... David Strand, Wisconsin Oven
It’s been a busy summer for David Strand, president and CEO of Wisconsin Oven. In June, his company was acquired by France’s PLC Holding, a leading manufacturer of industrial ovens for the aerospace, automotive, composite and finishing industries.
Read MorePowder Coating Training Class is Aug. 14-15
Parker Ionics hosts PCI training course in Westland, Michigan
Read MorePPG Aerospace Goes For Gold With British Airways’ Olympics Jet
Topcoats in gold, light grey and white celebrate the London 2012 Olympic and Paralympic Games.
Read MoreAsk The Expert: Streaks in Powder Coating
Q: We apply a medium-gloss gray powder on our parts at around 3 to 4 mils thickness. Sometimes our operators leave streaks on the parts when they apply the powder.
Read MoreSherwin-Williams Picked By SERDP To Lead R&D For CARC Powder Topcoat
$1.4 million project to develop a topcoat for use on military vehicles and support equipment
Read MoreAccelerating Topcoats for Aerospace Specifications
Bayer’s UV-A curable coatings provide rapid cure rate, high performance
Read MorePCI Executive Director Rodger Talbert Steps Down
Leaving June 1; also giving up role as PCI Technical Director.
Read MoreCracking Edges on MDF
We seem to have problems with thicker medium density fiberboard (MDF) cracking on the edges as it comes out of our ovens, and the cracking occurs down the middle of the edge. I have tried a few things, but nothing has worked too well. Do you have any advice?
Read More