curing
BASF building new automotive coatings plant in Shanghai
New production facility is scheduled to commence operation in early 2014; complements the company’s existing plant in Shanghai, which has been operating for more than 15 years.
Read MoreReducing Cure Time with a Hybrid Oven
Is it possible to decrease the curing time to fewer than 9 min if we change the oven to a hybrid system with combined infrared (IR) and convection heating?
Read MoreFlaking Paint
Should two-part epoxy paint be able to withstand a temperature of 450ºF for 3 1/2 min, which is required by the adhesive? What could be causing spotty adhesion failures demonstrated by the paint flaking off?
Read More
PPG Also Wins $1.5 Million Through DoD’s SERDP
PPG will work with ARL to develop a powder topcoat that will meet military standards for ultraviolet durability, matte finish and resistance to chemical agents.
Read More
StandardAero Gets Certification for Protective Coatings
Eight of its aircraft paint technicians have completed the Embry Riddle Aeronautics University/Society for Protective Coatings (SSPC) program in aircraft painting.
Read More
Q&A: Spray Gun Flow Rate Problem
Q. We have problems achieving consistent paint flow through our spray guns (typical rates range from 10 to 50 g/min).
Read More
BASF and Nissan Announce Streamlined Painting Processes
Supplies Nissan with coating solutions from e-coat and basecoat to clearcoat; also working on more streamlined technologies with Nissan in emerging markets such as China.
Read More
White Stays Atop the World’s Car Color Ranks
White/white pearl dominates the global automotive color popularity ranks for the second consecutive year, according to the 2012 DuPont Automotive Color Popularity Report. Black/black effect moves into second place
Read More
Waterborne painting process is a first at South Carolina BMW plant
PPG launched the first use of waterborne compact paint technology in a U.S. automotive manufacturing plant at the BMW assembly plant in Spartanburg, S.C. This painting process has turned out to be a 2012 award winner and has opened up a new way for auto manufacturers to go leaner and become more efficient in their operations.
Read More
There’s No Stopping This Powder Coating Line
McCain Manufacturing recently dramatically expanded its facilities to 100,000 sq ft to increase and improve its powder coating and finishing operations with a new automated conveyor that was installed along with a large-scale batch powder coating system.
Read More
