Electroplating
Electrodeposition of Ni-Fe-Mo-W Alloys - Part 3
3rd Quarterly Report - AESF Research Project #R-117 This paper was submitted to NASF and the AESF Foundation Research Board in October 2013 as a 3rd-quarter report of AESF Research Project #R-117.
Read MoreSelective Brush Plating a Tin-Zinc Alloy for Sacrificial Corrosion Protection
A tin-zinc selective brush plated coating has been developed to provide sacrificial corrosion protection without the use of toxic chemicals.
Read MoreNASF: OSHA Proposes New Workplace Exposure Standard for Respirable Crystalline Silica
Proposed rule would establish a new PEL of 50 μg/m3 with an action level 25 μg/m3 calculated as an eight-hour time-weighted average for general industry, half of the current standard
Read MoreOrder in the Courts
Tort reform needed so manufacturers can grow, investment can come here.
Read MoreWhen Plating Meets the Jet Set
Houston plater specializes in finishing private aircraft interiors; company offers more than 130 standard finishes and unlimited custom-matching capabilities.
Read MoreWaterborne Symposium 2014 Announces Program
The event kicks off with the Short Courses from February 24 – 25, followed by the Technology Showcase Exhibit Hall from February 25 – 27.
Read MoreWire Pitting
Could a change in the supplier of wire parts be the cause of increased pitting after plating?
Read MoreArtistic Application of Electroplating
I want to plate a pattern onto the metal cathode, moving a sharp/pointy anode around to trace out the pattern, but I can’t decide what metal to plate and what solution would be best.
Read MoreNASF: OSHA’s GHS HazCom Rule
OSHA’s implementation of the Globally Harmonized System deadline for the first round of regulations fell on Dec. 1, 2013.
Read More