sales
Adhesion over Powder Coated Surfaces
Is there a way to improve adhesion of two-component polyurethane adhesives to polyester- and epoxy-based powder-coated surfaces?
Read MoreCraters in the Paint
We sometimes have problems with craters in the paint film on the motorcycle parts we manufacture.
Read MoreRubber Powder
I am looking for a powder that can be applied by electrostatic spraying that will have a rubber-like finish.
Read MoreCopper Plating of Brass
Can we plate copper directly onto brass faucets using an acid copper bath?
Read MoreDip Tank Agitation
What is the best circulation pattern for paint with a 43 percent solids-by-volume content to obtain optimum consistency and to minimize or prevent settlement?
Read MoreHow to Measure Powder Value
What things should we consider as we evaluate different powder suppliers? How can we compare them so that we get the best material at the best possible price? How can we best determine the right source for our powder?
Read MoreCorrection: Non-Electrolytically Applied Zinc Coat
My response in the February issue regarding General Motors specification GMW 3359 for non-electrolytically applied zinc-rich coatings was incorrect. Here is the correct answer.
Read MoreFinishing Aluminum Parts
We are machining a 6-inch, complex-shaped, 6061 aluminum part. We need to further improve the surface finish from the machined 32 Ra to 12 Ra, maintaining a uniform, pleasant finish. What finish system should we consider?
Read MoreAAC Holding Anodizing Essentials Workshop In Italy
Anodizing Essentials Workshop (Level 1) on May 17 in conjunction with the 8th Aluminum Two Thousand International Congress in Milano, Italy
Read MoreBirmingham's Max Coatings Adds Second Plant in Atlanta
New 95,000 square-foot facility adds to the 55,000 square-foot location on Industrial Parkway in Birmingham.
Read More