sales
Corrosion Resistance Problems
Many mechanical specifications insist on hot-dip galvanizing for steam tunnels or outdoor applications. Is there any side by side comparison between the two methods?
Read MoreHash Marks
We recently changed to a fast drying enamel. Now, we get definite striations on the painted parts. What is causing this problem and what can we do about it?
Read MoreWhite Spots on Dark Powder Coatings
I am having a problem with white spots (particles) showing on my dark colors, black, blue, red.
Read MoreHumidity Problem
We frequently have humidity problems with our paint booth. Today, for example, the humidity reading in our paint room is 83%. Many of the specs call for no more than 50% humidity allowed. What type of vendor should we contact to solve our problem?
Read MoreConversion Coating For Powder
Have you found or know of an alternative to the Alodine that would give good adhesion and good Florida exposure.
Read MoreControlling Dissolved Aluminum in the Type II and Type III Anodizing Bath
Question: What is the purpose of controlling the concentration of aluminum in the anodizing bath?
Read MoreWelded Components and Blasting
Our company plates welded steel components with hard chrome. One of our customers requires a matte finish, which we attain by bead blasting. The problem we have is inconsistent appearance in the welded areas of the components. Do you have any suggestions?
Read MoreZinc Diecasts Again
Can you give us some ideas as to what might be causing this speckled plating?
Read MoreWaterborne Coatings in Summer Weather
I am inquiring if there is a general rule of thumb on applying waterbased coatings in the Summer. Are there any ranges the industry uses when selecting environmentally controlled booths?
Read More
