sales
Should We Use Educators to Agitate our Plating Baths
We are looking for a better way to agitate our plating baths.
Read MoreEntrepreneurial Spirit Drives Innovation
When planning coverage in Products Finishing, we always do our best to try to provide a good balance of topics and various types of coverage.
Read MoreCyanide Copper Strike
Our plating facility uses a copper cyanide strike in the process for plating zinc diecasts. Can the cyanide strike be eliminated and if so with what type of a plating bath?
Read MoreSurface Finishing Management Myths
Surface Finishing Management Myth: (sûrfs ‘fi-nishi[ng] mnj-mnt ‘mith) n. 1.
Read MoreConductive Coatings
We’ve heard of shops coating the parts with a conductive paint and then plating on top of it. Where can I find some information on that process?
Read MoreE-Coating Aluminum
We have heard of a pretreatment process that can be used prior to e-coating to fill in any porosity in the castings. I’m trying to find additional information about this product.
Read MoreTesting Clearcoats
What is the best way of testing clear coats over metal? What are some of the industry tests that can be used? Should it be tested by itself or with a basecoat?
Read MoreFisheye Eliminators
What ever happened to the magic elixir material that was sold as a fish eye eliminator and was it a type of silicone?
Read MoreElectric Charge Damaging Galvanized Coating
Would the galvanized coating on a traditional chain link fence be expected to be damaged, beyond the obvious burn areas, by an electrical charge from a 7,200 volt primary electric line (30 seconds on and 30 seconds off)?
Read More