Articles
NASF/AESF Foundation Research Project #122: Electrochemical Approaches to Treatment of PFAS in Plating Wastewater - 9th Quarterly Report
The NASF-AESF Foundation Research Board selected a project addressing the problem of PFAS and related chemicals in plating wastewater streams. This report covers the ninth quarter of work (January-March 2023). In this report, we describe our work on evaluating the performance of PFAS degradation by electrooxidation using surface fluorinated Ti4O7 anodes in batch mode.
Read More
Best Practices for Blast Room Maintenance
A high-quality blast room is a large investment. Brandon Acker of Titan Abrasive Systems discusses proper care for your blasting equipment.
Read More
Choosing Coatings for Best Transformer Performance
Protecting transformers from weather, wear and chemicals is the job of the coatings that are chosen by the power supply manufacturer. Knowing the most appropriate coatings and the best specifications for an application is critical to successfully keeping corrosion at bay.
Read MorePrevent Plating Problems with Critical Inspections
Tanks and their contents should be regularly inspected visually and analytically. When a quality issue arises, it is important to quickly pinpoint where the main problem is by checking which parameter is out of line.
Read MorePowder Coatings vs Energy-Cure Coatings
Examining the basic differences between powder coatings and energy-cure coatings can help answer the question of whether or not one of these technologies might be appropriate for a specific application.
Read More
Improving Wastewater Management Efficiency
Don’t find yourself underwater when managing wastewater processes. Follow these steps to improve efficiency and determine the best ROI.
Read More
Curing Oven Basics
Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...
Read More
Powder Coating 4.0: Smarter, Faster, More Efficient and Connected
New tools reduce cost and waste, lower manufacturing footprint of powder coating operations.
Watch
More Resources or a New Way of Thinking?
Set the goal then find and engage the resources needed to meet it.
Read More
Repair of Powder Surface Defects
Powder coating consultant Rodger Talbert offers advice for repairing scratches and other surface imperfections and recoating.
Read More
July Finishing Activity: Continued Contraction, Closes at 45.1
Finishing activity remained in contraction for July, reporting a 2-point drop for the second month in a row.
Read More
June Contraction Continues, Closing at 47.1
Finishing activity ended June in contraction, similar to the rest of the second quarter 2023.
Read More
