Articles
A Conversation with George Giering of Giering Metal Finishing Inc.
George Giering is third-generation president of Giering Metal Finishing Inc., a leader in liquid coating, ecoating and powder coating.
Read MoreCopper Anode Filming and Sludge Formation
Clarifying the role of film formation and anode-sludge creation in connection with the use of phosphorus-containing copper anodes in electroplating.
Read MoreA Conversation for International Women in Engineering Day
SIFCO ASC engineers Dr. Ani Zhecheva Brain and Danijela Milosevic-Popovich discuss the challenges of being a woman in a STEM related field, reflect on the achievements of women in engineering and talk about opportunities for women and girls interested in STEM.
Read MoreWhat's the Best Coating Method for Extended Outdoor Performance?
For long-lasting powder coating that holds up outdoors, consultant Rodger Talbert suggests pretreatment and washing options, a primer layer and a top coat.
Read MoreSelecting PPE for Your Paint Shop
Guidelines for determining the appropriate personal protective equipment for a painting operation.
Read MoreTips for Optimizing or Expanding Your Anodizing Line
Jim Acquaviva, director of business development for Technic Equipment, offers advice for assessing areas of process improvement for anodizing operations, outlining helpful steps for an end-user self-assessment.
Read More10 Things NOT to Do in a Virtual Meeting
The COVID crisis has triggered an evolution in the ways that we work and interact. Virtual meetings are here to stay, and, as we move forward, should be conducted with the same professionalism as in-person meetings.
Read MoreFinishers Report Slowing Decline in Business Conditions for First Time Since COVID-19
Index signals decelerating contraction as all components report improved readings.
Read MoreThe Right Solvent Creates the Cleanest Parts
Cox Manufacturing Co. has worked with Kyzen Corp. since it implemented its vacuum vapor degreaser to find just the right chemical solvent to clean its customers’ parts to their specifications and beyond.
Read MoreAES Research Project #41: Plating on Anodized Aluminum; Part 3: Pore Structure and Bonding
The effect of anodizing voltage on the adhesion of nickel electrodeposited on anodized aluminum is related to the morphology of the anodic film. In general, adhesion is a linear function of the applied anodizing voltage. New data on the initial stages of pore formation during anodizing indicate that: (1) that the growth mechanism during the initial stage (< 10 sec) differs from that during subsequent growth, (2) there is no metallic bonding and (3) electrodeposited nickel coatings typically fill the entire pore.
Read MoreAES Research Project #41: Part 4: Adhesion Failure of Electrodeposited Coatings on Anodized Aluminum Alloys
An SEM study of peel-test adhesion specimens from plated coatings on anodized aluminum shows that failure can be categorized in three different modes: (1) specimens exhibiting poor adhesion strength, which fail at the anodic film/coating interface; (2) specimens with good adhesion strength, which fail by local fracture of the anodic film and (3) specimens with excellent adhesion strength , which fail when the applied load is greater than the strength of the alloy substrate. The effect of anodizing parameters and alloy composition on peel test failure are discussed.
Read MoreHow to Create a ‘Frictionless’ Plating & Coating Supply Chain
Making an outside finishing vendor part of an integrated supply chain cuts costs for both parties and — even more importantly — enables increased throughput.
Read More