MMS Blog
ColDip Midnight 1500 Black Zinc Passivate Offers Enhanced Color and Cost Control
Three-part system allows for maximum color control and provides a consistent black appearance
Read MorePowder Coating Institute 3000 and 4000 Certifications—What You Need to Know
Assessment Program Offers Comprehensive Audit for Custom Coaters and OEMs
Read MoreUV-Cured Powder Coatings and LED-Curing Technology
UV curing of coatings is a proven technology and offers a practical and profitable alternative to traditional curing.
Read MoreComposite Electroless Nickel Coatings for the Wind Energy Industry
The ability to tailor CEN coatings with an array of synergistic particles makes these coatings uniquely beneficial for applications in the wind energy industry.
Read MoreReliable Plating Works Turns 90 Years Old
Julian Maliszewski bought into Reliable Plating Works in 1929 as a 25-year-old accountant, and the five-employee plant did everything by hand, and also did multiple finishes.
Read MoreWill 2019 be Smooth Sailing for the Finishing Industry? Here's One View.
Part of my job is to anticipate the future and, like the captain of the ship, steer a course that avoids turbulence as much as possible.
Read MoreAAMA Updates Guideline for Developing Color Measurement Requirements
AAMA CMR-1-18 was first released in 2016, and was made to accommodate changes made to measurement averaging and color difference equations.
Read MoreEnergy Coatings Get Big Lift
The March issue of Products Finishing takes a look at coatings for the energy sector, specifically for wind energy. Surface Technology’s Michael Feldstein takes a deep look at composite electroless nickel finishes.
Read MoreGema, Dubois and Vogel Industrial Coatings Hold Powder Coating Workshops
The first is training is May 1-2 in Las Vegas, and the second is September 10-11 in the Dallas area.
Read MoreNanoporous Anodic Oxides: Fabrication, Applications, Sensing and Biosensing
Numerous metals are subjected to anodic oxidation. As a result, one can obtain amorphous barrier-type oxides, crystalline barrier-type oxides or amorphous nanoporous oxides. This paper provides details of sensing techniques and recent advances in the development of NAA-based sensing and biosensing technologies.
Read MoreElectro-codeposition of MCrAlY Coatings for Advanced Gas Turbine Applications - 4th Quarterly Research Report
This NASF-AESF Foundation research project report covers the fourth quarter of project work (October-December 2018) on this AESF Foundation Research project at the Tennessee Technological University.
Read MoreAZZ to Purchase Tennessee Galvanizing
Tennessee Galvanizing has four operating galvanizing lines, including centrifuge, rod, conveyer and a 42-foot structural kettle.
Read More