MMS Blog
Episode 8: Considering Hex Chrome Alternatives
In this episode of On the Line, LumiShield CEO David Luebke and Senior Scientist John Watkins Ph.D. discuss the challenge of bringing alternative technologies to market.
ListenTo Counter or Not to Counter?
Research shows that providing a raise doesn’t fix the problem, it just delays it to a future date.
Read MoreOutsized Impact: Graphene Nanoplatelets
Nanoscale particles at fractions of a percent greatly improve performance of metal-protective paints, coatings, primers, waxes.
Read MoreAn Interview with Jason Ray, Paperless Parts
Jason Ray, CEO and co-founder of Paperless Parts, discusses trends in manufacturing and solutions that may help finishers streamline the ways they work with machine shops and fabricators.
Read MoreWho's Ready to Get On the Road Again?
Despite challenges, the surface finishing industry ramps up for a return to sorely missed in-person business and networking opportunities.
Read MoreCalibration of Expectations (and Rectifiers)
Breaking down the three major parts of calibration for rectifier use in the metal finishing industry.
Read MoreAvoiding White Spots Caused by Galvanic Corrosion on EN AW 2024
Four approaches to troubleshoot white spots that appear because of galvanic corrosion.
Read MoreWhat You Need to Know About EHLA
Ultra-fast coating process provides a metallurgical bond between the alloy coating and the metal substrate.
Read MoreSwitching from Decorative Hexavalent Chromium to Trivalent
Pavco decorative team manager, Shane Moore, discusses the considerations you should keep in mind when contemplating switching from decorative hexavalent chromium to trivalent.
Read MoreUnderstanding AAMA Specifications
Powder coating consultant Rodger Talbert explains AAMA specifications and considerations coaters should make before taking on work required to meet those standards.
Read MoreProper Powder Cure Oven Installation
Trey Peavy of RTT Engineered Finishing Solutions offers insights into considerations that must be taken into account when commissioning a powder cure oven.
Read More