Pretreatment for Powder Coating
Switching to Powder
We are a custom powder coater and a customer of ours wants to switch from e-coat to powder coat on his zinc parts. Is there something that either we, or our customer, can do to assure these zinc parts will have adequate and consistent adhesion? We coat aluminum and steel all day long and do not have these adhesion problems.
Read MorePowder Coat Stainless Steel
I work for an Indian company, a leading solar panel manufacturing company. We are required to powder coat stainless steel grade SS430, 2B finish. I would like to know what the process is for this and what would be the durability of such powder coat on stainless steel base.
Read MoreStill Valuable
Vapor degreasing remains the cleaning process of choice in some applications
Read MorePowder Coat Used As A Plating Maskant
I know you do not make recommendations for specific commercial powder coatings but maybe you can point me in the right direction. I want to use a powder coat as a maskant for our nickel plating process.
Read MorePowder Coating Brass
Can you powder coat a brass chandelier? How can I find a shop to perform this work?
Read MoreBlisters And Creep On Aluminum Castings
We have repeatedly failed a 336-hour salt spray test on an aluminum casting. We use an immersion bath iron phosphate conversion coating (soap, rinse, phosphate, rinse) and urethane powder coating. The results have consistently been blisters and significant creepback from scribe. How can we improve our adhesion and weather resistance on these die castings? What is causing the blistering? We could instead use a TGIC Polyester? Would these powders perform better?
Read MoreCapture Heat from Exhaust Gases, Save Energy
Process heat recovery unit can provide heating and cooling
Read MoreA Strong Finish
Bringing powder coating in-house leads to a top quality finish and quick turnaround
Read MoreFully Cured Powder
Is there a quick way to determine if a powder coating is fully cured? What Mil-Spec covers powder coating?
Read More