Electroplating
Combining 3D Printing and Electroplating for Replicable Experimentation
Andreas Osterwalder calls his office a museum: what looks like a collection of small machines are 3D printed and partially electroplated parts that the scientist has been creating for his experiments.
Read MoreCan Electroplated Fe-C be an Environmentally Friendly Alternative to Hard Chromium and DLC Coatings?
Electroplated FeC is an efficient surface treatment based on non-aggressive chemicals with a deposition rate of ~20 μm/h at a process temperature of 50°C. The FeC coating is carbide-free and temperature stable up to ~250°C with a hardness of 750 HV, which is comparable to frequently applied hardened steels. The FeC coating has reasonable friction properties and have high affinity towards lubricants because of incorporated amorphous carbon. Hence, for certain applications, the FeC coating might be an interesting wear-protective alternative to hard chromium and to PVD-deposited low-friction diamond-like carbon coatings (DLC’s), which are rather difficult and costly to deposit on larger items.
Read MoreFaraday's Children (and Nickel): The 40th William Blum Lecture
This article is a republication of the 40th William Blum Lecture, presented at the 86th AESF Annual Convention in Detroit, Michigan on June 21, 1999. In this lecture, Dr. George DiBari describes the search for the ideal nickel anode material and the outlook for survival of nickel plating at the end of the 20th century.
Read MoreHow Scanning Jet Engine Thermal Coatings Can Increase Engine Lifetime
A collaboration between Rolls-Royce and researchers at Heriot-Watt University to test jet engine turbine blades.
Read MoreRead the Interview: Uyemura's Tony Revier
Revier, who was attending IPC — Association Connecting Electronics Industries gathering in Washington, D.C. for IMPACT Washington, D.C. 2017 to advocate for a pro-growth, pro-advanced-manufacturing policy agenda.
Read MoreNASF Michigan Seminar Draws Technical Experts, Inspiration
Event draws finishers from across the state to hear technical experts and inspirational speakers, including highly decorated retired Navy Seal Robert J. O'Neill.
Read MoreMaking Contact with Your Plating Line
Picking the right electrical contact system is important for proper plating line optimization.
Read MoreWhat’s Suddenly Causing a Cleaner’s Short Bath Life?
Q. My cleaner is suddenly experiencing a short bath life. Did something change? Plating expert Jake Fisher from Asterion tackles this question.
Read MoreElectronic Plating: OutREACH or OverREACH?
U.S. chemical companies can benefit from compliance with the European regulation.
Read MorePlatform Specialty Products Separates MacDermid Into Own Unit
MacDermid Performance Solutions encompasses acquisitions it has made over the years, including Enthone and OMG.
Read More