Electroplating
Aluminum Electroplating Process Reaches 100-gallon Milestone
LumiShield recently conducted a demonstration of its Lumidize aluminum electroplating process at the 100-gallon scale, signifying the technology’s readiness for production-scale plating.
Read More
Polamer Precision Incorporates Selective Plating Into Production Line
Global aerospace manufacturing company Polamer Precision, has worked with SIFCO ASC to bring a selective plating process in-house for improved output, lead time and quality control.
Read More
The True Cost of SCR Versus Switch-Mode Rectifiers
Replacing old SCR rectifiers may help lower electrical costs, but choosing between modern SCR and SMPS rectifiers requires some careful consideration.
Read More
Copper Anode Filming and Sludge Formation
Clarifying the role of film formation and anode-sludge creation in connection with the use of phosphorus-containing copper anodes in electroplating.
Read More
NASF Releases PFAS Sampling and Analysis Plan
New Sampling and Analysis Plan (SAP) includes the best practices for collecting and analyzing PFAS samples from surface finishing operations.
Read More
A Conversation for International Women in Engineering Day
SIFCO ASC engineers Dr. Ani Zhecheva Brain and Danijela Milosevic-Popovich discuss the challenges of being a woman in a STEM related field, reflect on the achievements of women in engineering and talk about opportunities for women and girls interested in STEM.
Read More
Forplan AG and STC Dip Spin Join Forces
The two companies have formed a strategic alliance to expand capabilities serving the zinc flake coating industry.
Read More
AES Research Project #41: Plating on Anodized Aluminum; Part 3: Pore Structure and Bonding
The effect of anodizing voltage on the adhesion of nickel electrodeposited on anodized aluminum is related to the morphology of the anodic film. In general, adhesion is a linear function of the applied anodizing voltage. New data on the initial stages of pore formation during anodizing indicate that: (1) that the growth mechanism during the initial stage (< 10 sec) differs from that during subsequent growth, (2) there is no metallic bonding and (3) electrodeposited nickel coatings typically fill the entire pore.
Read More
AES Research Project #41: Part 4: Adhesion Failure of Electrodeposited Coatings on Anodized Aluminum Alloys
An SEM study of peel-test adhesion specimens from plated coatings on anodized aluminum shows that failure can be categorized in three different modes: (1) specimens exhibiting poor adhesion strength, which fail at the anodic film/coating interface; (2) specimens with good adhesion strength, which fail by local fracture of the anodic film and (3) specimens with excellent adhesion strength , which fail when the applied load is greater than the strength of the alloy substrate. The effect of anodizing parameters and alloy composition on peel test failure are discussed.
Read More
How to Create a ‘Frictionless’ Plating & Coating Supply Chain
Making an outside finishing vendor part of an integrated supply chain cuts costs for both parties and — even more importantly — enables increased throughput.
Read More
