marketing
Cure Oven Inspection Report
Terry Ray has seen nearly everything in his years inspecting e-coat paint cure ovens as a paint systems manager at KMI Systems Inc. (Crystal Lake, IL), a company that designs, builds and installs paint and porcelain finishing systems for customers such as General Electric, Whirlpool, Weber-Stephen and Maytag, among others.
Read MoreApril's Adhesion Problem
In the April issue there was a question about black paint having poor adhesion. You wrote about the oil absorption and bulking values of different pigments. I would have been interested in the gloss of his black paint.
Read MorePaint Compatibility
One of our customers has 48 steel valves ranging from from 6–48 inches. These valves were supplied to our customer coated with a high temperature one-pack silicone coating system. We have been instructed to repaint these valves.
Read MoreKeep on Truckin’ with the Right Coatings
The Raymond Corporation knew it wanted the latest technology available. The question was a little more complex: liquid or powder for its coating applications.
Read MoreSlaying the hard chrome dragon
In the endless pursuit for a replacement for hard chrome, Techmetals Inc. (Dayton, OH) may have a shining example of how to provide comparable corrosion performance, while also being environmentally friendly.
Read MorePainting Over Zinc Chromate
What is the best method of painting over 6061 Al that is covered with zinc chromate?
Read MoreCentrifugal Pump Versus Air-Operated Diaphragm Pump
We have an old wastewater pretreatment system for our metal finishing operation. The system contains two large air diaphragm pumps that transfer the wastewater from a holding tank to the flocculation tank before the clarifier. Since we are renovating the pretreatment system to extend its life, our team is arguing over whether to replace or keep these pumps.
Read MoreFull of Energy
One thing I’ve continually heard over the past several months is the need for finishing facilities to become more energy efficient in order to hold down costs and run a leaner operation.
Read MoreA New Wrinkle
The same paint does not produce the same wrinkle texture when applied by the vendors—and we have tried different vendors. The only difference I can see is that we use electrically-fired ovens and they use gas-fired ovens. What do you think about this?
Read MoreShaving the Whisker Problem
Whiskers are a problem that has plagued the plating industry for several years, and it isn’t something that a good shave and a haircut will solve. However, research is continuing to improve on ways to prevent them.
Read More