nasf

nasf 1 Dec 2013

Electrodeposition of Ni-Fe-Mo-W Alloys - Part 3

3rd Quarterly Report - AESF Research Project #R-117 This paper was submitted to NASF and the AESF Foundation Research Board in October 2013 as a 3rd-quarter report of AESF Research Project #R-117.

Anodizing 1 Dec 2013

NASF: OSHA Proposes New Workplace Exposure Standard for Respirable Crystalline Silica

Proposed rule would establish a new PEL of 50 μg/m3 with an action level 25 μg/m3 calculated as an eight-hour time-weighted average for general industry, half of the current standard

Anodizing 25 Nov 2013

NASF: OSHA’s GHS HazCom Rule

OSHA’s implementation of the Globally Harmonized System deadline for the first round of regulations fell on Dec. 1, 2013.

research 1 Nov 2013

Alloy Plating by Heating Stacked Single Layers and the Possibility of its Application in the Future

This paper was presented at NASF SUR/FIN 2013 in Rosemont, Ill., on June 10, 2013.

nasf 29 Oct 2013

Electroplated Tin-Nickel Coatings as a Replacement for Nickel to Eliminate Nickel Dermatitis

This paper is a peer-reviewed and edited version of a paper delivered at NASF SUR/FIN 2013 in Rosemont, Ill., on June 12, 2013.

research 10 Oct 2013

Electrodeposition of Ni-Fe-Mo-W Alloys - Part 2

This paper was submitted to NASF and the AESF Foundation Research Board in July 2013 as a 2nd-quarter report of AESF Research Project #R-117.

research 10 Oct 2013

Considerations Regarding the Proper Loading of Vibratory Finishing Bowls for Optimal Quality, Performance and Throughput Efficiency

Available since the late 1950s, traditional vibratory bowl processing has advanced in recent years from being a generic deburring tool to being able to achieve high-quality, isotropic superfinishes on critical, dimensionally-challenged workpieces. This paper is a peer-reviewed and edited version of a presentation delivered at NASF SUR/FIN 2013 in Rosemont, Ill., on June 11, 2013.