-
-
-
-
SPONSORED
Liquid Coating
Nanotechnologies Address Pipe Corrosion
The boom in the gas and oil business, both in the United States and globally, has refocused attention on efforts to reduce corrosion on the surfaces of pipes and equipment used in the industry.
Read MorePainting Viscosity vs. Temperature
One reader has something to add about paint temperature to Carl's response in the December 2012 column regarding spraying high-viscosity paints.
Read MorePainting Particle Board
I am looking for a paint or coating that can be used to coat the surface of the particle board panels in a production line environment after finish sanding and prior to a paper laminating process.
Read MoreCuring Polyurethane on Wood
Can you help us find a polyurethane varnish that will cure in our warm-air oven?
Read MorePaint Stripping Waste Disposal
In response to a question in the September 2012 column regarding the disposal of waste from paint stripping, one reader recommends purchase of a stripping oven, used to strip products and paint racks.
Read MoreMasking Painted Parts
When paint is applied to the instrument cases we manufacture it coats the threads of the tapped holes, causing difficulties in further assembly.Will changing the settings on the electrostatic gun help keep paint from coating the threads?
Read MoreCoating PVC Products
My company manufactures a line of products fabricated from black PVC irrigation pipe, and I would like to be able to offer these products in colors other than black. The coating must be abrasion-resistant enough to withstand metal and plastic objects sliding across its surface without scratching.
Read MoreCCAI SoCal Chapter Partners with Marines on 'Toys for Tots' Event
Nearly 190 toys collected to help disadvantaged kids
Read MoreBASF building new automotive coatings plant in Shanghai
New production facility is scheduled to commence operation in early 2014; complements the company’s existing plant in Shanghai, which has been operating for more than 15 years.
Read MoreFlaking Paint
Should two-part epoxy paint be able to withstand a temperature of 450ºF for 3 1/2 min, which is required by the adhesive? What could be causing spotty adhesion failures demonstrated by the paint flaking off?
Read More