Liquid Coating

Liquid Coating

Coating PVC Products

My company manufactures a line of products fabricated from black PVC irrigation pipe, and I would like to be able to offer these products in colors other than black. The coating must be abrasion-resistant enough to withstand metal and plastic objects sliding across its surface without scratching.

Read More
curing

CCAI SoCal Chapter Partners with Marines on 'Toys for Tots' Event

Nearly 190 toys collected to help disadvantaged kids

Read More
Electrocoating

BASF building new automotive coatings plant in Shanghai

New production facility is scheduled to commence operation in early 2014; complements the company’s existing plant in Shanghai, which has been operating for more than 15 years.

Read More
curing

Flaking Paint

Should two-part epoxy paint be able to withstand a temperature of 450ºF for 3 1/2 min, which is required by the adhesive? What could be causing spotty adhesion failures demonstrated by the paint flaking off?

Read More

New Chromium Electroplating Housekeeping Requirements

Alert for Platers: Your Deadline is March 19, 2013 as EPA finalized the residual risk and technology review for the national emission standards for hazardous air pollutants (NESHAP) for hard and decorative chromium electroplating and chromium anodizing tanks under 40 CFR Part 63

Read More
Liquid Coating

Coating Cast Zinc Jewelry

I would like to comment on “Coating Plated Zinc Jewelry” in your November column. We have been producing plated zinc die castings for 50 years and have been successfully applying clear e-coat to them for 12 years. We apply copper and nickel, followed by brass, bronze or gold, and then apply a 20-micron-thick clear e-coat and bake at 350°F for 40 min.

Read More
education

StandardAero Gets Certification for Protective Coatings

Eight of its aircraft paint technicians have completed the Embry Riddle Aeronautics University/Society for Protective Coatings (SSPC) program in aircraft painting.

Read More
Electrocoating

Impact of REACH Regulation on the Global Finishing Market

This paper is a peer-reviewed and edited version of a presentation delivered at NASF SUR/FIN 2012 in Las Vegas, Nev., on June 12, 2012.

Read More
masking

Q&A: Spray Gun Flow Rate Problem

Q. We have problems achieving consistent paint flow through our spray guns (typical rates range from 10 to 50 g/min).

Read More
Liquid Coating

Spray Gun Flow Rate Problem

How do we achieve consistent paint flow through our spray guns?

Read More
ENGINEERED PAINT BOOTHS & FINISHING SOLUTIONS
Precision gear pumps
Your Best Finish Starts With Us!
New Acid-Free Bright Nickel Process
find masking products online
Heatmax Heaters ad with immersion heaters
Pretreatment Washer and Finishing Equipment
OptiCenter All-in-One OC11
ENGINEERED PAINT BOOTHS & FINISHING SOLUTIONS