Liquid Coating

Liquid Coating

Painting Aluminum Tubes

In our product line we have an aluminum tube being used as an extension for a carbon mast. We have been painting this tube with white paint, but are having problems with the paint’s durability, as it is chipping.

Read More
Liquid Coating

Spray Booth and Oven Information

I need information about different types of paint spray booths (dry filter, water wash, powder coating spray booth, etc.) and the various types of paint curing ovens. Would you please point me in the direction of some good resources?

Read More
Liquid Coating

Parylene as a Coating method

I have a suggestion for another answer to the question appearing in the January 2011 issue of Painting Clinic regarding problems with creating a clear coating on brass.

Read More
Parts Cleaning

Flash Rusting

Our problem is that right after the acid pickle, the tanks flash rust severely before we can get them into the zinc phosphate solution.

Read More
Parts Cleaning

Paint Adhesion

Last year at this time we had a large amount of scrap due to paint adhesion failures. Our procedure for metal pretreatment was dip in alkaline cleaner, rinse in cold water and dip in a non-chromate final rinse. To solve this problem, I investigated other means of doing the job without going to an iron phosphate.

Read More
Powder Coating

2020 Vision: High-Performance Coatings

Currently, the NAFTA and European regions are considered to be more mature markets for traditional coatings applications, while the growing Asia region is expected to continue to expand.

Read More
Anodizing

2020 Vision: The Future of Coatings

The year 2020 will be here before you know it, signaling the beginning of a new decade and bringing changes to the world as we know it.

Read More
Liquid Coating

Painting Firearms Components

I just finished reading the “So You Want to Paint—Where to Start” article by Dale Stitt in the March 2011 issue of Products Finishing. HVLP spray gun jumped out as a possibility for painting our products.

Read More
Ask The Expert

Gas vs. Electric Ovens

What are the pros and cons for using gas or electric to heat a typical automotive supplier curing oven?

Read More
Liquid Coating

Painting Fish Hooks

What can you suggest in terms of applying a thicker coating to mass produce hooks that won’t bind together and thereby produce contact points?

Read More
Your Best Finish Starts With Us!
ENGINEERED PAINT BOOTHS & FINISHING SOLUTIONS
Precision gear pumps
Pretreatment Washer and Finishing Equipment
Gardner Intelligence
New Acid-Free Bright Nickel Process
PF Podcast
Filtration Systems
ENGINEERED PAINT BOOTHS & FINISHING SOLUTIONS