-
-
-
-
SPONSORED
Liquid Coating
When To Dump The Chemical Tanks
We use a three-stage iron phosphate system, and we seem to be using a lot of pretreatment chemicals. Can I establish a scientific program to indicate when the chemicals should be dumped?
Read MoreCentrifugal Coating
We have heard the terms “centrifuging” and “tumbling” finishing and wonder if these are possible processes for us to use on our products. What is your opinion?
Read MoreLow-Temperature Pretreatment
What kind of trouble can we expect if we reduce the temperatures of our pretreatment baths?
Read MoreNanotechnology in Finishing
Very small particles are having A Very large impact on coating materials and processes
Read MoreViscosity Cups
I was disturbed to discover that viscosity cups of the same type made by different suppliers do not give the same values, and did not agree with their respective data sheets as to volume.
Read MoreStenciling
We want to stencil information on corrugated stainless steel cladding installed on piping which will be exposed in a severe corrosive environment. Please advise if polyurethane can be applied directly to the stainless steel and will have a good service life if directly applied.
Read MoreResponse to Training Question
In regard to the question from C.L. in the August Clinic as to train or not to train, it sounds like C.L. is new on the job and was handed a problem area.
Read MoreExpanding on E-Coat
Electrocoat products and processes continue to evolve, with development focused on lower energy use, very low VOC content and methods to reduce cost per applied square foot. The following is a primer on how a combination of new materials and good process control can be used to achieve the highest possible efficiency.
Read More