Liquid Coating
Centrifugal Coating
We have heard the terms “centrifuging” and “tumbling” finishing and wonder if these are possible processes for us to use on our products. What is your opinion?
Read MoreLow-Temperature Pretreatment
What kind of trouble can we expect if we reduce the temperatures of our pretreatment baths?
Read MoreNanotechnology in Finishing
Very small particles are having A Very large impact on coating materials and processes
Read MoreStenciling
We want to stencil information on corrugated stainless steel cladding installed on piping which will be exposed in a severe corrosive environment. Please advise if polyurethane can be applied directly to the stainless steel and will have a good service life if directly applied.
Read MoreWet Adhesion Test Problem
We have problems with the wet adhesion test of epoxy primer 515K011 over colorless chemical conversion coating.
Read MoreExpanding on E-Coat
Electrocoat products and processes continue to evolve, with development focused on lower energy use, very low VOC content and methods to reduce cost per applied square foot. The following is a primer on how a combination of new materials and good process control can be used to achieve the highest possible efficiency.
Read MoreCheck Steel Type
I read with interest your reply to E. O. concerning his adhesion problem to the steel he’s purchasing from a new supplier.
Read MorePaint Technology Information
Can you please help me further by providing information sources on the details about the new inventions in this field?
Read MorePoor Paint Adhesion on Anodized Surfaces
I’m not sure it helps but just thought I’d share it.
Read More
