Powder Coating
Pops in the Coating
We are having a problem with a large number of fine and very dense pinholes popping up in our powder coating as it cures.
Read MoreOptions for Outdoors
We want to provide more powder coated products for outdoor use, but we do not want to get into zinc phosphate or chrome. Can we achieve good results on steel parts if we use a primer, and if so, how do we need to process the parts?
Read More
Just How Clean Is Clean?
Most finishing consultants have lost count of the number of times that inadequate cleaning and pretreatment was the cause of defective painting or plating. Skip plating, blistering, delamination—these are just some of the commonly found defects caused by poor cleaning.
Read More
Bernard Downey, Coating Pioneer, Passes Away at 88
Founder and president of B.L. Downey Co., a 325,000sf2 facility that specialized in e-coat and powder coating.
Read More
Navy Is Full Steam Ahead On Powder Coating
With the military increasing its use of powder-based coatings to cover vehicles, equipment and ships—the Army has recently announced that it will allow the use of powder coatings in its CARC coverings that are normally e-coated—more assets are getting the powder coating treatment than ever before, much to the joy of the powder manufacturers.
Read More
MATT KIRCHNER: "The Number One Problem Facing Surface Finishers Today"
Matt writes: With nearly one in five American workers either unemployed or underemployed it seems inconceivable that coaters and manufacturers alike would have such a difficult time finding the right people.
Read MoreFast Color Change
Our powder booth takes about 30 min to change from one reclaim color to another. We are thinking of making a change, but I wondered how much production time we could gain if we invest in new equipment. What are my options, and how fast can you change color in a powder booth?
Read More
FTC Says Graco-ITW Deal Violates Anti-Trust Laws
The FTC charges that if the proposed acquisition were completed, the combined firm would control a dominant share of all North American sales of industrial liquid finishing equipment and have a monopoly specifically in the market for circulation pumps used in paint systems in the automobile industry.
Read MoreCoating Methods to Avoid Rust
We manufacture basketball equipment that is used outdoors. Presently, we powder coat the equipment, but have had issues with rusting, especially in coastal and humid climates. Do you have any ideas for how to avoid the rust?
Read MoreVolcanoes in the Coating
We are seeing a defect in one of our smooth gray powder coatings that looks like little volcanoes and is in no repeatable pattern.
Read More
