Powder Coating
Stripping Powder-Coated Aluminum
I was wondering if you could recommend a process or chemical solution to strip powder-coated aluminum.
Read MoreAir Quality
I am currently designing a fluidized bed tank for PVC powder dipping, but I don’t know what temperature air inlet is required. And does the air inlet system need an oil and water filter?
Read MoreConductive Primer
Do you know if there is some metallic coat or adhesive bonding (conductive surface) available that will allow the powder coating application?
Read MorePaint For Qutdrive
For this application, if done properly, can powder coating equal or exceed the performance submerged in saltwater of Dupont Imron?
Read MoreStripping Aluminum Parts
We recently purchased aluminum machined parts from Taiwan with poor quality powder coating, and are now wondering if you could recommend a company that has a good history of stripping powder coat without damaging the machined part.
Read MoreMasking Plugs: Cost Effective?
Is there an alternative coating that can be used in the weld nut that’s not detrimental to the assembly and will absolutely not allow powder to stick to the threads? Are there any other alternatives to masking the threads with plugs that would be less costly?
Read MoreEpoxy Peeling Problem
After running the parts through a sterilization cycle, I lose the bond and the epoxy—it can be picked off with your fingers.
Read More