Powder Coating
Pros and Cons for Ambient Temp Pretreatment
Can you explain to me the pro’s and con’s of room-temperature-pretreatment?
Read MorePowder Removal Using Paint Stripper
I was reading your page on powder removal and was wonder if a regular automotive paint stripper would do the job.
Read MoreElectric Charge Damaging Galvanized Coating
Would the galvanized coating on a traditional chain link fence be expected to be damaged, beyond the obvious burn areas, by an electrical charge from a 7,200 volt primary electric line (30 seconds on and 30 seconds off)?
Read MorePreparing Copper for Powder Coat
I have a customer who is coating copper with an epoxy-based powder coating. Is there a recommended pretreatment for this type of system?
Read MoreChemical Buildup
Would stainless steel chain and hangers prevent the buildup? Or is there some other prevention?
Read MorePowder Coating For Exterior Durability
Can that level of dry film thickness (DFT) safely be applied in just one coat?
Read MorePowder Coating Heirlooms
I know that the heat of soldering brass will usually discolor the brass, but would the heat of a powder coating oven be sufficient to melt the solder or discolor the metals?
Read MoreRoot Causes of Defects
Do you have a visual chart that would show the potential painting defect and the root cause of it to help us better identify if the defect is caused by us or by the painting application? Also, what is the best method for preparing these surfaces to allow an even and consistent coating of paint?
Read MoreMicroscratch Resistent Coating
Is there any way to make a powder coated part micro scratch resistant?
Read More