Articles
In Mechanical Finishing, All That Glistens Is … Or Is It?
Surface finish types for commercially supplied stainless steel sheet are detailed in various standards. ASTM A480-12 and EN10088-2 are two; BS 1449-2 (1983) is still available, although no longer active. These standards are very similar in that they define eight grades of surface finish for stainless steel. Grade 7 is “buff polished,” while the highest polish—the so-called mirror polish—is designated Grade 8
Read MoreJust Peachy in South Carolina as Palmetto Plating thrives on ingenuity, automotives
More than 1 million of them pass through tanks each year at Palmetto, which specializes in anodizing, black oxide, chromate conversion coatings, decorative and hard chrome, electroless nickel, pickling, and passivation.
Read MoreDrawn to Closed-Loop Cleaning
For Gem Manufacturing of Waterbury, Conn., meeting customer quality standards is critical to the success of the business. Part of that means removing the synthetic and water-soluble drawing lubricants used in Gem’s transfer and progressive presses, as well as any other contaminants that could have a detrimental impact on performance.
Read MoreTriumph Group Acquires Aerospace Finisher Embee Incorporated
Embee employs approximately 400 people, and offers high velocity oxy fuel, anodize/hard anodize, paint, chrome plating, shot peen and cadmium plating.
Read MoreSifco Applied Surface Concepts Group Acquired by Norman Hay Group
Sifco ASC brand is one of the largest manufacturer and supplier of process equipment and associated chemicals for selective electroplating and anodizing. It also has its own subcontract process operations across the U.S. and Europe.
Read MoreSFCHINA2012 Attracts 10,000+ To Guangzhou
With China has become the world's biggest finishing market, organizers say the 25th edition of the China International Exhibition for Surface Finishing & Coating Products Nov 28-30 was well attended.
Read MoreMechanical Vapor Recompression Evaporation
MVRE is underutilized in the treatment of industrial wastewaters that are typical of metal fabricating and finishing industries. Increasing energy costs, rapidly decreasing freshwater resources, and growing sensitivity towards the environmental impact of industrial management practices are the driving forces in the development of more sustainable technology.
Read MoreNASF Bright Design Challenge Kicks Off Jan. 16
Kick off in Detroit is scheduled for January 16. The event is timed perfectly for the Detroit Auto Show, and the NASF Board will also be meeting in town to fully support the event.
Read MoreAnoStyle Offers Anodized Color Options For iPhone, iPad
AnoStyle in Rochester, MI offers the service for $249 per phone with about a one-week turnaround time. The company says its closest competitor, Colorware, is charging $850 for the service.
Read MoreHow ‘Transparent’ Is Graphene, Researchers Ask?
MIT researchers find that adding a coating of graphene has little effect on how a surface interacts with liquids — except in extreme cases.
Read MoreHard Lessons in Hardcoating
Michael Kelner decided in 2007 to invest in a hardcoat aluminum anodizing shop in Minneapolis, despite having no coating experience whatsoever. Today, after investing more than $4 million and 10 months after construction started, Kelner has new equipment in a relocated and refurbished facility.
Read MoreGrinding Out a Polished Finish
Enerquip installed a special two-head OD polisher built by Grinding and Polishing Machinery of Indianapolis, Ind., a specialist in designing and building industrial grinding and polishing machinery. It uses the stainless pipes for the sanitary-grade shell and tube heat exchangers it designs and manufactures for the food, dairy, beverage, pharmaceutical and biotech industries in the U.S. and internationally.
Read More