Articles
Accuride Expands Powder Coating Plant In KY
$5.8 million to expand its powder coating capacity with the installation of a new state-of-the-art coating line; See The Video
Watch
GE Aviation Building Ceramic Coating Plant In North Carolina
CMCs are made of silicon carbide ceramic fibers and ceramic resin, manufactured through a highly sophisticated process and further enhanced with proprietary coatings.
Read More
Q&A: Removing Buffing Compound
Readers says they hand-wipe clean using solvent then electroclean, but what is the best way to remove the buffing compound?
Read More
Q&A: Removing Emulsified Oils from Cleaner
A reader asks: How can we remove the emulsified oils before painting shelving?
Read More
Q&A: Hard-To-Buff Silver Deposit
A Reader asks: Do you have suggestions for resolving an issue with silver-plated deposits that are difficult to polish and buff?
Read More
Kirchner's "Scoreboard" Finds Its Way On Shop Walls
Max Coatings owner "borrows" Kirchner's "Plant Performance Goals" scoresheet
Read More
Axalta Coating Systems Launches New Logo, Website
Former DuPont division changes name, launches new website and corporate identity
Read More
Nickel Regulation and NASF Action
The NASF continues to work closely on advocacy efforts to ensure that U.S. and global regulatory bodies make responsible and scientifically-informed decisions on materials uses for a range of coatings processes.
Read More
Breaking Old Mechanical Finishing Habits
Changing the process earns one finisher a $2+ million annual contract, therefore when we look at mechanical finishing, the first and most important items that should be considered are the shape and type of part
Read More
Surviving an OSHA Inspection
Hearing that an inspector is at the door can send shudders down the spine of any facility manager. The writer speaks from personal experience: his company went through an inspection by the Occupational Safety and Health Administration.
Read More
MFASC Seeks New Executive Director
Dan Cunningham leaves as Executive Director after accepting a position with Bowman Plating, a member company.
Read More
Advanced Technical Finishing Continues $10 Million Renovation
Plans include upgrading current anodizing line equipment to allow for increased capacity on Type I, II and III anodizing, new electroless nickel lines and a titanium Type II & III finishing line.
Read More
