Articles
Chrome Comes Under Fire...Again
A proposed new standard for occupational exposure to hexavalent chrome suggests lowering the permissible exposure limit to less than 1/50th its current level. Here's a look at the proposed limits, how they were conceived, and how the industry is responding...
Read MoreHow to Bring Out the Best in Your People
Because there is a direct correlation between your performance and that of your people, your success as a supervisor depends on your ability to bring out the best in them.
Read MoreDo It Yourself
Simplex, Inc., a manufacturer of electrical test systems and fuel supply systems, established a need to upgrade its pretreatment line from a three-stage system to a five-stage system. Equipped with experience in fluid transportation and storage, they decided to design and build it themselves...
Read MoreNetwork Advantage
With an array of strategically located service centers around the country, ThermoBurr has established itself as a "one-stop shop," capable of handling the full spectrum of deburring needs...
Read MoreCaustic Bath for Pre-copper Plating
Can you help me come up with the amounts of caustic potash and potassium cyanide that you need to makeup a caustic bath to use to neutralize acids from parts prior to copper plating them.
Read MoreThis is the Best Thing You'll Ever Read
I'm going to share a very big secret with you, one that will likely get me into a lot of trouble with my fellow writers.
Read MoreSafety In and Around the Powder Coating Line
While safety in the powder coating job shop has improved dramatically in recent years, accidents, injuries and work stoppages still occur today. For a better understanding of safety in and around the powder coating line, we asked a Certified Safety Professional to share with us his approach to safety...
Read MoreOptimizing Paint Durability, Part II
It is not uncommon for military tactical systems to spend anywhere from 24 to 30 months in harsh marine environments. Consequently, the vast majority of once new equipment is in need of selective overhaul. Part two of this article discusses production methodologies for improvement of paint durability on these systems, with an emphasis on pretreatment and topcoat...
Read MoreWhat is Zinc Anodizing?
Question: I was asked the other day whether our shop could perform zinc anodizing.
Read MoreQuestions for the Ages
Preventing material waste is a mutual goal for finishers and their customers. Effective communication is critical in this respect. Here are some common questions that anodizers should be prepared to address when working with both new and existing customers…
Read MoreOptimizing Paint Durability, Part I
The rapid deployment of military force dictates that military assets be readily available in potential areas of conflict. As a means to this end, military equipment is prepositioned on ships. While the combat systems are sequestered in environmentally controlled holding areas, tactical systems are chained to the deck in a harsh marine environment. Following 24–30 months of marine exposure, the vast majority of once new equipment is in need of selective overhaul…
Read More