Articles
Selecting PPE for Your Paint Shop
Guidelines for determining the appropriate personal protective equipment for a painting operation.
Read More10 Things NOT to Do in a Virtual Meeting
The COVID crisis has triggered an evolution in the ways that we work and interact. Virtual meetings are here to stay, and, as we move forward, should be conducted with the same professionalism as in-person meetings.
Read More
Finishers Report Slowing Decline in Business Conditions for First Time Since COVID-19
Index signals decelerating contraction as all components report improved readings.
Read More
The Right Solvent Creates the Cleanest Parts
Cox Manufacturing Co. has worked with Kyzen Corp. since it implemented its vacuum vapor degreaser to find just the right chemical solvent to clean its customers’ parts to their specifications and beyond.
Read More
AES Research Project #41: Plating on Anodized Aluminum; Part 3: Pore Structure and Bonding
The effect of anodizing voltage on the adhesion of nickel electrodeposited on anodized aluminum is related to the morphology of the anodic film. In general, adhesion is a linear function of the applied anodizing voltage. New data on the initial stages of pore formation during anodizing indicate that: (1) that the growth mechanism during the initial stage (< 10 sec) differs from that during subsequent growth, (2) there is no metallic bonding and (3) electrodeposited nickel coatings typically fill the entire pore.
Read More
AES Research Project #41: Part 4: Adhesion Failure of Electrodeposited Coatings on Anodized Aluminum Alloys
An SEM study of peel-test adhesion specimens from plated coatings on anodized aluminum shows that failure can be categorized in three different modes: (1) specimens exhibiting poor adhesion strength, which fail at the anodic film/coating interface; (2) specimens with good adhesion strength, which fail by local fracture of the anodic film and (3) specimens with excellent adhesion strength , which fail when the applied load is greater than the strength of the alloy substrate. The effect of anodizing parameters and alloy composition on peel test failure are discussed.
Read More
How to Create a ‘Frictionless’ Plating & Coating Supply Chain
Making an outside finishing vendor part of an integrated supply chain cuts costs for both parties and — even more importantly — enables increased throughput.
Read More
Finishing Index Contraction Accelerates As COVID-19 Disruption Continues
Index moves nearly 10-Points below prior low of 2012.
Read More
A Conversation with Kevin Coursin, Powder Coating Institute
Kevin Coursin, longtime member of the industrial finishing industry, was named executive director of the Powder Coating Institute (PCI) earlier this year.
Read MorePersevering Through a Crisis
Former Navy SEAL gives lessons for the finishing industry on how to cope with the COVID-19 pandemic.
Read More
Understanding Paint Atomization
BASF coatings development expert Tim December explains how paint atomization works for both pneumatic spray applicators and high-speed rotary bell applicators.
Read More
Deep Connections Translate to Success for JIT Powder Coating Company
The 27-year-old powder coating operation invests in employees and customers, fostering a business built on loyalty.
Read More
